Modulo:String: differenze tra le versioni

Da Semi del Verbo, l'enciclopedia dell'influenza del Vangelo sulla cultura
(separate annotations for str.match from those for str._match)
m (una versione importata: Template:Man)
(Nessuna differenza)

Versione delle 17:03, 19 ago 2020

Modulo Lua per la manipolazione di stringhe.

La maggior parte delle funzioni di questo modulo possono essere invocate con parametri con nome, senza nome o con un misto di entrambi. Il software di MediaWiki, quando vengono usati parametri con nome, rimuoverà ogni spazio iniziale o finale dal parametro. A seconda dell'uso che si vuole fare della funzione può essere vantaggioso conservare oppure rimuovere questi spazi.

Chiamata delle funzioni

Questo modulo è pensato per essere richiamato da template, non direttamente da una voce. Il modulo è richiamabile anche da un altro modulo Lua, ma in questo caso è meglio usare direttamente le funzioni Lua di manipolazione delle stringhe:

Per richiamare il modulo da un template usare la sintassi: {{{{{|safesubst:}}}#invoke:String|nome della funzione|parametro 1|parametro 2|...|parametro n|}}. Per esempio d'uso vedi il template {{Str len}}

Opzioni globali

Alcune funzioni possono dare un messaggio di errore o impostare una categoria di errori, la generazione di questo messaggio e/o la creazione di questa categoria possono essere controllate dalle seguenti opzioni.

ignore_errors: se impostato a 1 o "true" ogni condizione di errore darà una stringa vuota piuttosto che un messaggio di errore.
error_category: nel caso si verifichi un errore è il nome di una categoria da includere insieme al messaggio di errore. La categoria di default è Categoria:Errori riportati dal modulo String.
no_category: Se settato a 1 o "true", non verranno aggiunte categorie in caso di errore.

Funzioni

len

Questa funzione restituisce la lunghezza di una stringa.

Uso
  • {{#invoke:String|len|stringa}}

O

  • {{#invoke:String|len|s= stringa }}
Parametri
  • s: La stringa di cui restituire la lunghezza

Se invocata usando parametri nominati, Mediawiki rimuoverà automaticamente ogni spazio iniziale o finale dalla stringa.

sub

Questa funzione restituisce la sottostringa di una stringa bersaglio, come indicato dagli indici

Uso
  • {{#invoke:String|sub|stringa_bersaglio|indice_iniziale|indice_finale}}

O

  • {{#invoke:String|sub|s= stringa_bersaglio |i= indice_iniziale |j= indice_finale }}
Parametri
  • s: La stringa da cui estrarre una sottostringa
  • i: La posizione iniziale del primo carattere della sottostringa da restituire, se non specificato è 1.
  • j: La posizione finale dell'ultimo carattere della sottostringa da restituire, se non specificato corrisponde alla lunghezza della stringa_bersaglio (l'ultimo carattere).

I caratteri della stringa sono numerati a partire da 1. Se i o j hanno un valore negativo allora contano la posizione contando dalla fine della stringa, -1 è l'ultimo carattere della stringa, -2 il penultimo, ecc...

Se le posizioni sono al di fuori degli estremi della stringa viene restituito un messaggio di errore.

match

Questa funzione restituisce una sottostringa della stringa bersaglio corrispondente a un pattern specificato.

Uso
  • {{#invoke:String|match|source_string|pattern_string|start_index|match_number|plain_flag|nomatch_output}}

O

  • {{#invoke:String|match|s= source_string |pattern= pattern_string |start= start_index |match= match_number |plain= plain_flag |nomatch= nomatch_output }}
Parametri
  • s: la stringa da cercare
  • pattern: il pattern da cercare nella stringa s
  • start: la posizione iniziale da cui iniziare la ricerca, se non specificato è 1.
  • match: se ci sono corrispondenze multiple, quale restituire: 1 per la prima corrispondenza, 2 per la seconda, ecc... Un valore negativo indica di contare all'indietro a partire dall'ultima corrispondenza, quindi match = -1 significa chiedere l'ultima corrispondenza. Se non specificato è 1
  • plain: se vero specifica che il pattern deve essere considerato come una stringa normale, piuttosto che un pattern Lua. Se non specificata è falso.
  • nomatch: il valore da restituire se non ci sono corrispondenze, invece di un errore.

Se richiamata usando parametri nominati Mediawiki rimuoverà automaticamente tutti gli spazi iniziali e finali. In alcune circostanze questo può essere il comportamento desiderato, in altre si potrebbe volerli conservare.

Se match o start sono al di fuori degli estremi della stringa s, allora la funzione restituisce un errore. Viene generato un errore anche se il non vengono trovate corrispondenze. Per sopprimere gli errori si può aggiungere il parametro ignore_errors=true, in questo caso in caso di errore verrà restituita una stringa vuota.

pos

Questa funzione restituisce il carattere della stringa in posizione pos.

Uso
  • {{#invoke:String|pos|stringa_bersaglio|indice}}

O

  • {{#invoke:String|pos|target= stringa_bersaglio |pos= indice }}
Parametri
  • target: la stringa in cui cercare
  • pos: la posizione del carattere da restituire

Se richiamata usando parametri nominati Mediawiki rimuoverà automaticamente tutti gli spazi iniziali e finali. In alcune circostanze questo può essere il comportamento desiderato, in altre si potrebbe volerli conservare.

I caratteri della stringa sono numerati a partire da 1. Se pos è un valore negativo allora conta la posizione partendo dalla fine della stringa, -1 è l'ultimo carattere della stringa, -2 il penultimo, ecc...

Se la posizione richiesta è 0 o al di fuori degli estremi della stringa viene restituito un errore.

str_find

Questa funzione duplica il comportamento di {{str_find}}, inclusi i casi particolari. Questa funzione è fornita per motivi di compatibilità con i vecchi template, ma SI RACCOMANDA di non utilizzarla in nuovi template. Nello sviluppo di nuovo codice si raccomanda di usare la funzione find.

Parametri
  • source: la stringa in cui cercare
  • target: la stringa da cercare

Restituisce la posizione nella stringa source del primo carattere in cui è stata trovata la stringa target. I caratteri della stringa sono numerati a partire da 1. La funzione restituisce -1 se la stringa target non è contenuta in source.

Nota importante: Per compatibilità con il vecchio template, se la stringa target è vuota o manca, la funzione restituisce il valore "1"

find

Questa funzione permette di cercare una stringa bersaglio o un pattern Lua all'interno di un'altra stringa.

Uso
  • {{#invoke:String|find|stringa_sorgente|stringa_bersaglio|indice_iniziale|plain_flag}}

O

  • {{#invoke:String|find|source= stringa_sorgente |target= stringa_bersaglio |start= indice_iniziale |plain= plain_flag }}
Parametri
  • source: la stringa in cui cercare
  • target: la stringa o pattern Lua da cercare
  • start: la posizione da cui iniziare la ricerca, se non specificato è 1
  • plain: Se è vero indica che la stringa target deve essere considerata come un testo normale e non come un pattern Lua, se non specificata è vera

Se richiamata usando parametri nominati Mediawiki rimuoverà automaticamente tutti gli spazi iniziali e finali. In alcune circostanze questo può essere il comportamento desiderato, in altre si potrebbe volerli conservare.

Questa funzione restituisce la prima posizione maggiore o uguale a start a partire dalla quale target si trova in source. I caratteri della stringa sono numerati a partire da 1. Se target non viene trovato dà 0. Se source o target sono mancanti o vuoti dà 0.

Questa funzione dovrebbe essere sicura per stringhe UTF-8.

replace

Questa funzione permette di rimpiazzare una stringa o pattern bersaglio con un'altra stringa.

Uso
  • {{#invoke:String|replace|stringa_sorgente|stringa_pattern|nuova_stringa|numero_di_sostituzioni|plain_flag}}

O

  • {{#invoke:String|replace|source= stringa_sorgente |pattern= stringa_pattern |replace= nuova_stringa | count= numero_di_sostituzioni |plain= plain_flag }}
Parametri
  • source: la stringa in cui cercare
  • pattern: la stringa o pattern Lua da trovare in source
  • replace: il testo di sostituzione
  • count: il numero di volte in cui rimpiazzare la stringa, se non specificato tutte.
  • plain: se vero indica che il pattern deve essere considerato come testo normale e non come pattern Lua, il valore di default è vero

arraytostring

Formatta una o più liste di valori in una singola stringa

Uso
  • {{#invoke:String|arraytostring|par1|formato|separatore|congiunzione}}
Parametri
  • par1 ... parn: il nome base delle variabili da unire, deve contenere il carattere "#" che precisa la posizione in cui inserire l'indice. Ad esempio se par1 è "Param#", la funzione unirà i valori della lista di parametri Param1, Param2, Param3, ecc...
    Il parametro "Param" (senza numero) sarà considerato equivalente a "Param1" (questo comportamento può essere modificato con il parametro "baseIndex")
  • msg: formattazione da applicare alla compilazione dei parametri. Il simbolo $n fa da segnaposto per il parametro "parn". È possibile inserire codice mediawiki, ma eventuali caratteri "{" e "}" dovranno essere preceduti da un "\", mentre il carattere "|" dovrà essere inserito con la costante {{!}}. Un eventuale "\}" finale deve sempre essere staccato, con spazio o altro, dal "}}" di fine comando.
  • separatore: una stringa (opzionale) da inserire tra ogni valore
  • congiunzione: una stringa (opzionale) da inserire al posto del separatore tra l'ultimo e il penultimo valore. Se non dichiarata viene usato il valore di "separatore"
  • nmin: indice iniziale da cui partire a scandire i parametri (di default pari a 1)
  • nmax: indice massimo a cui è possibile arrivare con i parametri (se non precisato è illimitato)
  • nobbligatori = l'indice minimo che deve essere valutato anche in presenza di buchi nella sequenza (come indice massimo sarà comunque valutato "nmax")
  • baseIndex: valore dell'indice parametrico che coincide con il parametro senza indice (normalmente è 1, quindi i parametri "par1" e "par" sono equivalenti; se per esempio viene impostato a 0 allora è "par0" che sarà equivalente a "par")
  • lista: parametro a cui è possibile assegnare uno tra i seguenti valori.
    puntata - formatta l'elenco di valori come una lista puntata (i valori di "separatore" e "congiunzione" sono ignorati)
    ordinata - formatta l'elenco di valori come una lista numerata (i valori di "separatore" e "congiunzione" sono ignorati)
    infobox - formatta l'elenco di valori come una lista puntata (i valori di "separatore" e "congiunzione" sono ignorati), eccetto che nel caso in cui ci sia un solo elemento
Esempi di chiamata
{{#invoke:string|arraytostring|par1=var#|separatore= |congiunzione= e }}
Formatta una lista di parametri "var1", "var2" ... "varn" separandoli con una virgola, tranne per gli ultimi due uniti dalla congiunzione " e "
{{#invoke:string|arraytostring|par1=disegnatore #|par2=disegnatore # nota|msg = $1 <small>$2</small>|lista=infobox}}
Formatta coppie di parametri "disegnatore 1", "disegnatore 2" ... "disegnatore n" e "disegnatore 1 nota", "disegnatore 2 nota" ... "disegnatore n nota". Ogni coppia sarà formattata come "Disegnatore disegnatore nota" e queste saranno unite in una lista puntata. Usata in {{Personaggio}} per formattare le liste di disegnatori/autori/editori, ecc...
{{#invoke:String|arraytostring|par1=#|msg=''$1''|separatore=<nowiki>|</nowiki>|Nmin=2}}
Unisce i parametri ordinali "2", "3" ... "n" in una lista separate da "|". Ogni valore viene reso in corsivo. Usata in {{tl}} per formattare la lista opzionale di parametri.

collate

Questa funzione restituisce la stringa privata degli eventuali segni diacritici sulle lettere dell'alfabeto latino. Trasforma ad esempio "Çịàö" in "Errore script: la funzione "collate" non esiste.", preferibile ad esempio per gli ordinamenti alfabetici.

Uso
  • {{#invoke:String|collate|stringa}}
Parametri
  • stringa: La stringa da cui togliere i segni

decode

Questa funzione accetta una stringa codificata con il sistema a percentuali usato negli URL e restituisce la stringa decodificata. Fa quindi l'opposto della funzione di sistema urlencode. Trasforma ad esempio "Come%20va%3F" in "Errore script: la funzione "decode" non esiste.".

Uso
  • {{#invoke:String|decode|stringa}}
Parametri
  • stringa: La stringa da decodificare

titolo_alfa

Questa funzione accetta una stringa che corrisponde a un titolo di opera e restituisce la stringa adattata all'ordinamento alfabetico. Trasforma ad esempio "La pietà" in "Errore script: la funzione "titolo_alfa" non esiste.". Non funziona sempre, non potendo capire il significato delle parole, ma risolve automaticamente la maggior parte dei casi.

Uso
  • {{#invoke:String|titolo_alfa|titolo}}
Parametri
  • titolo: Il titolo di opera. Di default viene preso il titolo della pagina in cui ci si trova.

Unit test

Unit test per questo modulo sono disponibili a Modulo:String/test, per la loro esecuzione visitare Discussioni_modulo:String/test.

Documentazione sui pattern Lua

Diverse funzioni fanno uso di pattern Lua, questi sono una forma di espressione regolare, per maggiori informazioni sulla loro sintassi vedi:


--[[

This module is intended to provide access to basic string functions.

Most of the functions provided here can be invoked with named parameters,
unnamed parameters, or a mixture.  If named parameters are used, Mediawiki will
automatically remove any leading or trailing whitespace from the parameter.
Depending on the intended use, it may be advantageous to either preserve or
remove such whitespace.

Global options
    ignore_errors: If set to 'true' or 1, any error condition will result in
        an empty string being returned rather than an error message.

    error_category: If an error occurs, specifies the name of a category to
        include with the error message.  The default category is
        [Category:Errors reported by Module String].

    no_category: If set to 'true' or 1, no category will be added if an error
        is generated.

Unit tests for this module are available at Module:String/tests.
]]

local str = {}

--[[
len

This function returns the length of the target string.

Usage:
{{#invoke:String|len|target_string|}}
OR
{{#invoke:String|len|s=target_string}}

Parameters
    s: The string whose length to report

If invoked using named parameters, Mediawiki will automatically remove any leading or
trailing whitespace from the target string.
]]
function str.len( frame )
	local new_args = str._getParameters( frame.args, {'s'} )
	local s = new_args['s'] or ''
	return mw.ustring.len( s )
end

--[[
sub

This function returns a substring of the target string at specified indices.

Usage:
{{#invoke:String|sub|target_string|start_index|end_index}}
OR
{{#invoke:String|sub|s=target_string|i=start_index|j=end_index}}

Parameters
    s: The string to return a subset of
    i: The fist index of the substring to return, defaults to 1.
    j: The last index of the string to return, defaults to the last character.

The first character of the string is assigned an index of 1.  If either i or j
is a negative value, it is interpreted the same as selecting a character by
counting from the end of the string.  Hence, a value of -1 is the same as
selecting the last character of the string.

If the requested indices are out of range for the given string, an error is
reported.
]]
function str.sub( frame )
	local new_args = str._getParameters( frame.args, { 's', 'i', 'j' } )
	local s = new_args['s'] or ''
	local i = tonumber( new_args['i'] ) or 1
	local j = tonumber( new_args['j'] ) or -1

	local len = mw.ustring.len( s )

	-- Convert negatives for range checking
	if i < 0 then
		i = len + i + 1
	end
	if j < 0 then
		j = len + j + 1
	end

	if i > len or j > len or i < 1 or j < 1 then
		return str._error( 'String subset index out of range' )
	end
	if j < i then
		return str._error( 'String subset indices out of order' )
	end

	return mw.ustring.sub( s, i, j )
end

--[[
This function implements that features of {{str sub old}} and is kept in order
to maintain these older templates.
]]
function str.sublength( frame )
	local i = tonumber( frame.args.i ) or 0
	local len = tonumber( frame.args.len )
	return mw.ustring.sub( frame.args.s, i + 1, len and ( i + len ) )
end

--[[
_match

This function returns a substring from the source string that matches a
specified pattern. It is exported for use in other modules

Usage:
strmatch = require("Module:String")._match
sresult = strmatch( s, pattern, start, match, plain, nomatch )

Parameters
    s: The string to search
    pattern: The pattern or string to find within the string
    start: The index within the source string to start the search.  The first
        character of the string has index 1.  Defaults to 1.
    match: In some cases it may be possible to make multiple matches on a single
        string.  This specifies which match to return, where the first match is
        match= 1.  If a negative number is specified then a match is returned
        counting from the last match.  Hence match = -1 is the same as requesting
        the last match.  Defaults to 1.
    plain: A flag indicating that the pattern should be understood as plain
        text.  Defaults to false.
    nomatch: If no match is found, output the "nomatch" value rather than an error.

For information on constructing Lua patterns, a form of [regular expression], see:

* http://www.lua.org/manual/5.1/manual.html#5.4.1
* http://www.mediawiki.org/wiki/Extension:Scribunto/Lua_reference_manual#Patterns
* http://www.mediawiki.org/wiki/Extension:Scribunto/Lua_reference_manual#Ustring_patterns

]]
-- This sub-routine is exported for use in other modules
function str._match( s, pattern, start, match_index, plain_flag, nomatch )
	if s == '' then
		return str._error( 'Target string is empty' )
	end
	if pattern == '' then
		return str._error( 'Pattern string is empty' )
	end
	start = tonumber(start) or 1
	if math.abs(start) < 1 or math.abs(start) > mw.ustring.len( s ) then
		return str._error( 'Requested start is out of range' )
	end
	if match_index == 0 then
		return str._error( 'Match index is out of range' )
	end
	if plain_flag then
		pattern = str._escapePattern( pattern )
	end

	local result
	if match_index == 1 then
		-- Find first match is simple case
		result = mw.ustring.match( s, pattern, start )
	else
		if start > 1 then
			s = mw.ustring.sub( s, start )
		end

		local iterator = mw.ustring.gmatch(s, pattern)
		if match_index > 0 then
			-- Forward search
			for w in iterator do
				match_index = match_index - 1
				if match_index == 0 then
					result = w
					break
				end
			end
		else
			-- Reverse search
			local result_table = {}
			local count = 1
			for w in iterator do
				result_table[count] = w
				count = count + 1
			end

			result = result_table[ count + match_index ]
		end
	end

	if result == nil then
		if nomatch == nil then
			return str._error( 'Match not found' )
		else
			return nomatch
		end
	else
		return result
	end
end

--[[
match

This function returns a substring from the source string that matches a
specified pattern.

Usage:
{{#invoke:String|match|source_string|pattern_string|start_index|match_number|plain_flag|nomatch_output}}
OR
{{#invoke:String|match|s=source_string|pattern=pattern_string|start=start_index
    |match=match_number|plain=plain_flag|nomatch=nomatch_output}}

Parameters
    s: The string to search
    pattern: The pattern or string to find within the string
    start: The index within the source string to start the search.  The first
        character of the string has index 1.  Defaults to 1.
    match: In some cases it may be possible to make multiple matches on a single
        string.  This specifies which match to return, where the first match is
        match= 1.  If a negative number is specified then a match is returned
        counting from the last match.  Hence match = -1 is the same as requesting
        the last match.  Defaults to 1.
    plain: A flag indicating that the pattern should be understood as plain
        text.  Defaults to false.
    nomatch: If no match is found, output the "nomatch" value rather than an error.

If invoked using named parameters, Mediawiki will automatically remove any leading or
trailing whitespace from each string.  In some circumstances this is desirable, in
other cases one may want to preserve the whitespace.

If the match_number or start_index are out of range for the string being queried, then
this function generates an error.  An error is also generated if no match is found.
If one adds the parameter ignore_errors=true, then the error will be suppressed and
an empty string will be returned on any failure.

For information on constructing Lua patterns, a form of [regular expression], see:

* http://www.lua.org/manual/5.1/manual.html#5.4.1
* http://www.mediawiki.org/wiki/Extension:Scribunto/Lua_reference_manual#Patterns
* http://www.mediawiki.org/wiki/Extension:Scribunto/Lua_reference_manual#Ustring_patterns

]]
-- This is the entry point for #invoke:String|match
function str.match( frame )
	local new_args = str._getParameters( frame.args, {'s', 'pattern', 'start', 'match', 'plain', 'nomatch'} )
	local s = new_args['s'] or ''
	local start = tonumber( new_args['start'] ) or 1
	local plain_flag = str._getBoolean( new_args['plain'] or false )
	local pattern = new_args['pattern'] or ''
	local match_index = math.floor( tonumber(new_args['match']) or 1 )
	local nomatch = new_args['nomatch']

	return str._match( s, pattern, start, match_index, plain_flag, nomatch )
end

--[[
pos

This function returns a single character from the target string at position pos.

Usage:
{{#invoke:String|pos|target_string|index_value}}
OR
{{#invoke:String|pos|target=target_string|pos=index_value}}

Parameters
    target: The string to search
    pos: The index for the character to return

If invoked using named parameters, Mediawiki will automatically remove any leading or
trailing whitespace from the target string.  In some circumstances this is desirable, in
other cases one may want to preserve the whitespace.

The first character has an index value of 1.

If one requests a negative value, this function will select a character by counting backwards
from the end of the string.  In other words pos = -1 is the same as asking for the last character.

A requested value of zero, or a value greater than the length of the string returns an error.
]]
function str.pos( frame )
	local new_args = str._getParameters( frame.args, {'target', 'pos'} )
	local target_str = new_args['target'] or ''
	local pos = tonumber( new_args['pos'] ) or 0

	if pos == 0 or math.abs(pos) > mw.ustring.len( target_str ) then
		return str._error( 'String index out of range' )
	end

	return mw.ustring.sub( target_str, pos, pos )
end

--[[
str_find

This function duplicates the behavior of {{str_find}}, including all of its quirks.
This is provided in order to support existing templates, but is NOT RECOMMENDED for
new code and templates.  New code is recommended to use the "find" function instead.

Returns the first index in "source" that is a match to "target".  Indexing is 1-based,
and the function returns -1 if the "target" string is not present in "source".

Important Note: If the "target" string is empty / missing, this function returns a
value of "1", which is generally unexpected behavior, and must be accounted for
separatetly.
]]
function str.str_find( frame )
	local new_args = str._getParameters( frame.args, {'source', 'target'} )
	local source_str = new_args['source'] or ''
	local target_str = new_args['target'] or ''

	if target_str == '' then
		return 1
	end

	local start = mw.ustring.find( source_str, target_str, 1, true )
	if start == nil then
		start = -1
	end

	return start
end

--[[
find

This function allows one to search for a target string or pattern within another
string.

Usage:
{{#invoke:String|find|source_str|target_string|start_index|plain_flag}}
OR
{{#invoke:String|find|source=source_str|target=target_str|start=start_index|plain=plain_flag}}

Parameters
    source: The string to search
    target: The string or pattern to find within source
    start: The index within the source string to start the search, defaults to 1
    plain: Boolean flag indicating that target should be understood as plain
        text and not as a Lua style regular expression, defaults to true

If invoked using named parameters, Mediawiki will automatically remove any leading or
trailing whitespace from the parameter.  In some circumstances this is desirable, in
other cases one may want to preserve the whitespace.

This function returns the first index >= "start" where "target" can be found
within "source".  Indices are 1-based.  If "target" is not found, then this
function returns 0.  If either "source" or "target" are missing / empty, this
function also returns 0.

This function should be safe for UTF-8 strings.
]]
function str.find( frame )
	local new_args = str._getParameters( frame.args, {'source', 'target', 'start', 'plain' } )
	local source_str = new_args['source'] or ''
	local pattern = new_args['target'] or ''
	local start_pos = tonumber(new_args['start']) or 1
	local plain = new_args['plain'] or true

	if source_str == '' or pattern == '' then
		return 0
	end

	plain = str._getBoolean( plain )

	local start = mw.ustring.find( source_str, pattern, start_pos, plain )
	if start == nil then
		start = 0
	end

	return start
end

--[[
replace

This function allows one to replace a target string or pattern within another
string.

Usage:
{{#invoke:String|replace|source_str|pattern_string|replace_string|replacement_count|plain_flag}}
OR
{{#invoke:String|replace|source=source_string|pattern=pattern_string|replace=replace_string|
   count=replacement_count|plain=plain_flag}}

Parameters
    source: The string to search
    pattern: The string or pattern to find within source
    replace: The replacement text
    count: The number of occurences to replace, defaults to all.
    plain: Boolean flag indicating that pattern should be understood as plain
        text and not as a Lua style regular expression, defaults to true
]]
function str.replace( frame )
	local new_args = str._getParameters( frame.args, {'source', 'pattern', 'replace', 'count', 'plain' } )
	local source_str = new_args['source'] or ''
	local pattern = new_args['pattern'] or ''
	local replace = new_args['replace'] or ''
	local count = tonumber( new_args['count'] )
	local plain = new_args['plain'] or true

	if source_str == '' or pattern == '' then
		return source_str
	end
	plain = str._getBoolean( plain )

	if plain then
		pattern = str._escapePattern( pattern )
		replace = mw.ustring.gsub( replace, "%%", "%%%%" ) --Only need to escape replacement sequences.
	end

	local result

	if count ~= nil then
		result = mw.ustring.gsub( source_str, pattern, replace, count )
	else
		result = mw.ustring.gsub( source_str, pattern, replace )
	end

	return result
end

--[[
    simple function to pipe string.rep to templates.
]]
function str.rep( frame )
	local repetitions = tonumber( frame.args[2] )
	if not repetitions then
		return str._error( 'function rep expects a number as second parameter, received "' .. ( frame.args[2] or '' ) .. '"' )
	end
	return string.rep( frame.args[1] or '', repetitions )
end

--[[
escapePattern

This function escapes special characters from a Lua string pattern. See [1]
for details on how patterns work.

[1] https://www.mediawiki.org/wiki/Extension:Scribunto/Lua_reference_manual#Patterns

Usage:
{{#invoke:String|escapePattern|pattern_string}}

Parameters
    pattern_string: The pattern string to escape.
]]
function str.escapePattern( frame )
	local pattern_str = frame.args[1]
	if not pattern_str then
		return str._error( 'No pattern string specified' )
	end
	local result = str._escapePattern( pattern_str )
	return result
end

--[[
count
This function counts the number of occurrences of one string in another.
]]
function str.count(frame)
	local args = str._getParameters(frame.args, {'source', 'pattern', 'plain'})
	local source = args.source or ''
	local pattern = args.pattern or ''
	local plain = str._getBoolean(args.plain or true)
	if plain then
		pattern = str._escapePattern(pattern)
	end
	local _, count = mw.ustring.gsub(source, pattern, '')
	return count
end

--[[
endswith
This function determines whether a string ends with another string.
]]
function str.endswith(frame)
	local args = str._getParameters(frame.args, {'source', 'pattern'})
	local source = args.source or ''
	local pattern = args.pattern or ''
	if pattern == '' then
		-- All strings end with the empty string.
		return "yes"
	end
	if mw.ustring.sub(source, -mw.ustring.len(pattern), -1) == pattern then
		return "yes"
	else
		return ""
	end
end

--[[
join

Join all non empty arguments together; the first argument is the separator.
Usage:
{{#invoke:String|join|sep|one|two|three}}
]]
function str.join(frame)
	local args = {}
	local sep
	for _, v in ipairs( frame.args ) do
		if sep then
			if v ~= '' then
				table.insert(args, v)
			end
		else
			sep = v
		end
	end
	return table.concat( args, sep or '' )
end

--[[
Helper function that populates the argument list given that user may need to use a mix of
named and unnamed parameters.  This is relevant because named parameters are not
identical to unnamed parameters due to string trimming, and when dealing with strings
we sometimes want to either preserve or remove that whitespace depending on the application.
]]
function str._getParameters( frame_args, arg_list )
	local new_args = {}
	local index = 1
	local value

	for _, arg in ipairs( arg_list ) do
		value = frame_args[arg]
		if value == nil then
			value = frame_args[index]
			index = index + 1
		end
		new_args[arg] = value
	end

	return new_args
end

--[[
Helper function to handle error messages.
]]
function str._error( error_str )
	local frame = mw.getCurrentFrame()
	local error_category = frame.args.error_category or 'Errors reported by Module String'
	local ignore_errors = frame.args.ignore_errors or false
	local no_category = frame.args.no_category or false

	if str._getBoolean(ignore_errors) then
		return ''
	end

	local error_str = '<strong class="error">String Module Error: ' .. error_str .. '</strong>'
	if error_category ~= '' and not str._getBoolean( no_category ) then
		error_str = '[[Category:' .. error_category .. ']]' .. error_str
	end

	return error_str
end

--[[
Helper Function to interpret boolean strings
]]
function str._getBoolean( boolean_str )
	local boolean_value

	if type( boolean_str ) == 'string' then
		boolean_str = boolean_str:lower()
		if boolean_str == 'false' or boolean_str == 'no' or boolean_str == '0'
				or boolean_str == '' then
			boolean_value = false
		else
			boolean_value = true
		end
	elseif type( boolean_str ) == 'boolean' then
		boolean_value = boolean_str
	else
		error( 'No boolean value found' )
	end
	return boolean_value
end

--[[
Helper function that escapes all pattern characters so that they will be treated
as plain text.
]]
function str._escapePattern( pattern_str )
	return mw.ustring.gsub( pattern_str, "([%(%)%.%%%+%-%*%?%[%^%$%]])", "%%%1" )
end

return str