Modulo:String: differenze tra le versioni

Da Semi del Verbo, l'enciclopedia dell'influenza del Vangelo sulla cultura
m (una versione importata)
Nessun oggetto della modifica
Riga 1: Riga 1:
--[[
--[[


This module is intended to provide access to basic string functions.
Questo modulo serve a fornire l'accesso alle funzioni stringa base.


Most of the functions provided here can be invoked with named parameters,
La maggior parte delle funzioni di questo modulo possono essere invocate con
unnamed parameters, or a mixture. If named parameters are used, Mediawiki will
parametri con nome, senza nome o con un misto di entrambi. Quando vengono usati
automatically remove any leading or trailing whitespace from the parameter.
parametri con nome il software di Mediawiki rimuoverà ogni spazio iniziale o finale
Depending on the intended use, it may be advantageous to either preserve or
dal parametro. A seconda dell'uso che si vuole fare della funzione può essere
remove such whitespace.
vantaggioso conservare oppure rimuovere questi spazi.


Global options
Opzioni globali
     ignore_errors: If set to 'true' or 1, any error condition will result in
     ignore_errors: se settato a 'true' o 1, ogni condizione di errore ritornerà una stringa vuota
        an empty string being returned rather than an error message.
                  piuttosto che un messaggio di errore.


     error_category: If an error occurs, specifies the name of a category to
     error_category: nel caso si verifichi un errore è il nome di una categoria da includere
        include with the error message. The default category is
                    insieme al messaggio di errore. La categoria di default
        [Category:Errors reported by Module String].
                    [Categoria:Errori del Module String]. (TODO:verificare)


     no_category: If set to 'true' or 1, no category will be added if an error
     no_category: Se settato a 'true' o 1, non verranno aggiunte categorie in caso di errore.
        is generated.
 
Unit tests per questo modulo sono disponibili a Module:String/test.
 
Diverse funzioni fanno uso di pattern Lua, questi sono una forma di espressione regolare, per
maggiori informazioni vedi:
* http://www.lua.org/manual/5.1/manual.html#5.4.1
* http://www.mediawiki.org/wiki/Extension:Scribunto/Lua_reference_manual#Patterns
* http://www.mediawiki.org/wiki/Extension:Scribunto/Lua_reference_manual#Ustring_patterns


Unit tests for this module are available at Module:String/tests.
]]
]]


Riga 28: Riga 34:
len
len


This function returns the length of the target string.
Questa funzione ritorna la lunghezza di una stringa.


Usage:
Uso:
{{#invoke:String|len|target_string|}}
{{#invoke:String|len|stringa|}}
OR
O
{{#invoke:String|len|s=target_string}}
{{#invoke:String|len|s=stringa}}


Parameters
Parametri
     s: The string whose length to report
     s: La stringa di cui ritornare la lunghezza


If invoked using named parameters, Mediawiki will automatically remove any leading or
Se invocata usando parametri nominati, Mediawiki rimuoverà automaticamente ogni spazio iniziale
trailing whitespace from the target string.
o finale dalla stringa.
]]
]]
function str.len( frame )
function str.len( frame )
local new_args = str._getParameters( frame.args, {'s'} )
    local new_args = str._getParameters( frame.args, {'s'} );
local s = new_args['s'] or ''
    local s = new_args['s'] or '';
return mw.ustring.len( s )
    return mw.ustring.len( s )
end
end


Riga 50: Riga 56:
sub
sub


This function returns a substring of the target string at specified indices.
Questa funzione ritorna la sottostringa di una stringa bersaglio, come indicato dagli indici


Usage:
Uso:
{{#invoke:String|sub|target_string|start_index|end_index}}
{{#invoke:String|sub|stringa_bersaglio|indice_iniziale|indice_finale}}
OR
O
{{#invoke:String|sub|s=target_string|i=start_index|j=end_index}}
{{#invoke:String|sub|s=stringa_bersaglio|i=indice_iniziale|j=indice_finale}}


Parameters
Parameters
     s: The string to return a subset of
     s: La stringa da cui estrarre una sottostringa
     i: The fist index of the substring to return, defaults to 1.
     i: La posizione iniziale del primo carattere della sottostringa da ritornare, se non
     j: The last index of the string to return, defaults to the last character.
      specificato è 1.
     j: La posizione finale dell'ultimo carattere della sottostringa da ritornare, se non
      specificato corrisponde alla lunghezza della stringa_bersaglio (l'ultimo carattere).


The first character of the string is assigned an index of 1. If either i or j
I caratteri della stringa sono numerati a partire da 1. Se i o j hanno un valore negativo allora
is a negative value, it is interpreted the same as selecting a character by
contano la posizione contando dalla fine della stringa, -1 è l'ultimo carattere della stringa,
counting from the end of the string.  Hence, a value of -1 is the same as
-2 il penultimo, ecc...
selecting the last character of the string.


If the requested indices are out of range for the given string, an error is
Se le posizioni sono al di fuori degli estremi della stringa viene ritornato un messaggio di
reported.
errore.
]]
]]
function str.sub( frame )
function str.sub( frame )
local new_args = str._getParameters( frame.args, { 's', 'i', 'j' } )
    local new_args = str._getParameters( frame.args, { 's', 'i', 'j' } );
local s = new_args['s'] or ''
    local s = new_args['s'] or '';
local i = tonumber( new_args['i'] ) or 1
    local i = tonumber( new_args['i'] ) or 1;
local j = tonumber( new_args['j'] ) or -1
    local j = tonumber( new_args['j'] ) or -1;


local len = mw.ustring.len( s )
    local len = mw.ustring.len( s );


-- Convert negatives for range checking
    -- Convert negatives for range checking
if i < 0 then
    if i < 0 then
i = len + i + 1
        i = len + i + 1;
end
    end
if j < 0 then
    if j < 0 then
j = len + j + 1
        j = len + j + 1;
end
    end


if i > len or j > len or i < 1 or j < 1 then
    if i > len or j > len or i < 1 or j < 1 then
return str._error( 'String subset index out of range' )
        return str._error( 'Indici fuori dagli estremi della stringa' );
end
    end
if j < i then
    if j < i then
return str._error( 'String subset indices out of order' )
        return str._error( 'Indici in ordine sbagliato' );
end
    end


return mw.ustring.sub( s, i, j )
    return mw.ustring.sub( s, i, j )
end
end


--[[
--[[
This function implements that features of {{str sub old}} and is kept in order
Questa funzione implementa tutte le caratteristiche di  {{str sub}} e viene mantenuta per motivi
to maintain these older templates.
di compatibilità con template più vecchi.
]]
]]
function str.sublength( frame )
function str.sublength( frame )
local i = tonumber( frame.args.i ) or 0
    local i = tonumber( frame.args.i ) or 0
local len = tonumber( frame.args.len )
    local len = tonumber( frame.args.len )
return mw.ustring.sub( frame.args.s, i + 1, len and ( i + len ) )
    return mw.ustring.sub( frame.args.s, i + 1, len and ( i + len ) )
end
end


--[[
--[[
_match
match


This function returns a substring from the source string that matches a
Questa funzione ritorna dalla stringa bersaglio una sottostringa corrispondente a un pattern
specified pattern. It is exported for use in other modules
specificato.


Usage:
Uso:
strmatch = require("Module:String")._match
{{#invoke:String|match|source_string|pattern_string|start_index|match_number|plain_flag|nomatch_output}}
sresult = strmatch( s, pattern, start, match, plain, nomatch )
O
{{#invoke:String|match|s=source_string|pattern=pattern_string|start=start_index
    |match=match_number|plain=plain_flag|nomatch=nomatch_output}}


Parameters
Parametri
     s: The string to search
     s: La stringa da cercare
     pattern: The pattern or string to find within the string
     pattern: Il pattern da cercare nella stringa
     start: The index within the source string to start the search.  The first
     start: La posizione iniziale da cui iniziare la ricerca, se non specificato è 1.
        character of the string has index 1.  Defaults to 1.
     match: Se c'è ci sono corrispondenze multiple quale ritornare, 1 per la prima
     match: In some cases it may be possible to make multiple matches on a single
    corrispondenza, 2 per la seconda ecc.. Un valore negativo indica di contare
        string. This specifies which match to return, where the first match is
    all'indietro a partire dall'ultima corrispondenza, quindi match = -1 significa
        match= 1.  If a negative number is specified then a match is returned
    chiedere l'ultima corrispondenza. Se non specificato è 1
        counting from the last match.  Hence match = -1 is the same as requesting
     plain: Se vero specifica che il pattern deve essere considerato come una
        the last match. Defaults to 1.
          stringa normale, piuttosto che un pattern Lua. Se non specificata è falsa.
     plain: A flag indicating that the pattern should be understood as plain
     nomatch: Il valore da ritornare se non ci sono corrispondenze, invece di ritornare
        text. Defaults to false.
            un errore.
     nomatch: If no match is found, output the "nomatch" value rather than an error.


For information on constructing Lua patterns, a form of [regular expression], see:
Se richiamata usando parametri nominati Mediawiki rimuoverà automaticamente tutti gli
spazi iniziali e finali. In alcune circostanze questo può essere il comportamento
desiderato, in altre si potrebbe volerli conservare.


* http://www.lua.org/manual/5.1/manual.html#5.4.1
Se match_number o start_index sono al di fuori degli estremi della stringa s, allora
* http://www.mediawiki.org/wiki/Extension:Scribunto/Lua_reference_manual#Patterns
la funzione ritorna un errore. Viene generato un errore anche se il non vengono trovate
* http://www.mediawiki.org/wiki/Extension:Scribunto/Lua_reference_manual#Ustring_patterns
corrispondenze. Per sopprimere gli errori si può aggiungere il parametro ignore_errors=true,
in questo caso in caso di errore verrò ritornata una stringa vuota.


]]
]]
-- This sub-routine is exported for use in other modules
function str.match(frame)
function str._match( s, pattern, start, match_index, plain_flag, nomatch )
    return str._match(frame.args)
if s == '' then
return str._error( 'Target string is empty' )
end
if pattern == '' then
return str._error( 'Pattern string is empty' )
end
start = tonumber(start) or 1
if math.abs(start) < 1 or math.abs(start) > mw.ustring.len( s ) then
return str._error( 'Requested start is out of range' )
end
if match_index == 0 then
return str._error( 'Match index is out of range' )
end
if plain_flag then
pattern = str._escapePattern( pattern )
end
 
local result
if match_index == 1 then
-- Find first match is simple case
result = mw.ustring.match( s, pattern, start )
else
if start > 1 then
s = mw.ustring.sub( s, start )
end
 
local iterator = mw.ustring.gmatch(s, pattern)
if match_index > 0 then
-- Forward search
for w in iterator do
match_index = match_index - 1
if match_index == 0 then
result = w
break
end
end
else
-- Reverse search
local result_table = {}
local count = 1
for w in iterator do
result_table[count] = w
count = count + 1
end
 
result = result_table[ count + match_index ]
end
end
 
if result == nil then
if nomatch == nil then
return str._error( 'Match not found' )
else
return nomatch
end
else
return result
end
end
end


--[[
--[[
match
Entry point per chiamata diretta da un modulo
]]
function str._match( args )
    local new_args = str._getParameters( args, {'s', 'pattern', 'start', 'match', 'plain', 'nomatch'} );
    local s = new_args['s'] or '';
    local start = tonumber( new_args['start'] ) or 1;
    local plain_flag = str._getBoolean( new_args['plain'] or false );
    local pattern = new_args['pattern'] or '';
    local match_index = math.floor( tonumber(new_args['match']) or 1 );
    local nomatch = new_args['nomatch'];


This function returns a substring from the source string that matches a
    if s == '' then
specified pattern.
        return nomatch or str._error( 'La stringa in cui cercare è vuota' );
    end
    if pattern == '' then
        return nomatch or str._error( 'La stringa o pattern da cercare è vuota' );
    end
    if math.abs(start) < 1 or math.abs(start) > mw.ustring.len( s ) then
        return nomatch or str._error( 'La posizione iniziale richiesta è fuori dagli estremi della stringa' );
    end
    if match_index == 0 then
        return nomatch or str._error( 'Match index è nullo' );
    end
    if plain_flag then
        pattern = str._escapePattern( pattern );
    end


Usage:
    local result
{{#invoke:String|match|source_string|pattern_string|start_index|match_number|plain_flag|nomatch_output}}
     if match_index == 1 then
OR
         -- Il caso più semplice, trova la prima corrispondenza
{{#invoke:String|match|s=source_string|pattern=pattern_string|start=start_index
         result = mw.ustring.match( s, pattern, start )
     |match=match_number|plain=plain_flag|nomatch=nomatch_output}}
     else
 
         if start > 1 then
Parameters
            s = mw.ustring.sub( s, start );
    s: The string to search
        end
    pattern: The pattern or string to find within the string
    start: The index within the source string to start the search.  The first
        character of the string has index 1.  Defaults to 1.
    match: In some cases it may be possible to make multiple matches on a single
         string.  This specifies which match to return, where the first match is
         match= 1. If a negative number is specified then a match is returned
        counting from the last match. Hence match = -1 is the same as requesting
        the last match.  Defaults to 1.
     plain: A flag indicating that the pattern should be understood as plain
         text.  Defaults to false.
    nomatch: If no match is found, output the "nomatch" value rather than an error.
 
If invoked using named parameters, Mediawiki will automatically remove any leading or
trailing whitespace from each string. In some circumstances this is desirable, in
other cases one may want to preserve the whitespace.


If the match_number or start_index are out of range for the string being queried, then
        local iterator = mw.ustring.gmatch(s, pattern);
this function generates an error.  An error is also generated if no match is found.
        if match_index > 0 then
If one adds the parameter ignore_errors=true, then the error will be suppressed and
            -- Ricerca in avanti
an empty string will be returned on any failure.
            for w in iterator do
                match_index = match_index - 1;
                if match_index == 0 then
                    result = w;
                    break;
                end
            end
        else
            -- Ricerca all'indietro deve estrarre tutte le corrispondenze
            local result_table = {};
            local count = 1;
            for w in iterator do
                result_table[count] = w;
                count = count + 1;
            end


For information on constructing Lua patterns, a form of [regular expression], see:
            result = result_table[ count + match_index ];
        end
    end


* http://www.lua.org/manual/5.1/manual.html#5.4.1
    if result == nil then
* http://www.mediawiki.org/wiki/Extension:Scribunto/Lua_reference_manual#Patterns
        if nomatch == nil then
* http://www.mediawiki.org/wiki/Extension:Scribunto/Lua_reference_manual#Ustring_patterns
            return str._error( 'Corrispondenza non trovata' );
 
        else
]]
            return nomatch;
-- This is the entry point for #invoke:String|match
        end
function str.match( frame )
    else
local new_args = str._getParameters( frame.args, {'s', 'pattern', 'start', 'match', 'plain', 'nomatch'} )
        return result;
local s = new_args['s'] or ''
    end
local start = tonumber( new_args['start'] ) or 1
local plain_flag = str._getBoolean( new_args['plain'] or false )
local pattern = new_args['pattern'] or ''
local match_index = math.floor( tonumber(new_args['match']) or 1 )
local nomatch = new_args['nomatch']
 
return str._match( s, pattern, start, match_index, plain_flag, nomatch )
end
end


Riga 257: Riga 226:
pos
pos


This function returns a single character from the target string at position pos.
Questa funzione ritorna il carattere della stringa in posizione pos.


Usage:
Uso:
{{#invoke:String|pos|target_string|index_value}}
{{#invoke:String|pos|stringa_bersaglio|indice}}
OR
O
{{#invoke:String|pos|target=target_string|pos=index_value}}
{{#invoke:String|pos|target=stringa_bersaglio|pos=indice}}


Parameters
Parametri
     target: The string to search
     target: La stringa in cui cercare
     pos: The index for the character to return
     pos: La posizione del carattere da ritornare


If invoked using named parameters, Mediawiki will automatically remove any leading or
Se richiamata usando parametri nominati Mediawiki rimuoverà automaticamente tutti gli
trailing whitespace from the target string. In some circumstances this is desirable, in
spazi iniziali e finali. In alcune circostanze questo può essere il comportamento
other cases one may want to preserve the whitespace.
desiderato, in altre si potrebbe volerli conservare.


The first character has an index value of 1.
I caratteri della stringa sono numerati a partire da 1. Se pos è un valore negativo allora
conta la posizione partendo dalla fine della stringa, -1 è l'ultimo carattere della stringa,
-2 il penultimo, ecc...


If one requests a negative value, this function will select a character by counting backwards
Se la posizione richiesta è 0 o al di fuori degli estremi della stringa viene ritornato
from the end of the string.  In other words pos = -1 is the same as asking for the last character.
un errore.
 
A requested value of zero, or a value greater than the length of the string returns an error.
]]
]]
function str.pos( frame )
function str.pos( frame )
local new_args = str._getParameters( frame.args, {'target', 'pos'} )
    local new_args = str._getParameters( frame.args, {'target', 'pos'} );
local target_str = new_args['target'] or ''
    local target_str = new_args['target'] or '';
local pos = tonumber( new_args['pos'] ) or 0
    local pos = tonumber( new_args['pos'] ) or 0;


if pos == 0 or math.abs(pos) > mw.ustring.len( target_str ) then
    if pos == 0 or math.abs(pos) > mw.ustring.len( target_str ) then
return str._error( 'String index out of range' )
        return str._error( 'Indice della stringa fuori dagli estremi' );
end
    end


return mw.ustring.sub( target_str, pos, pos )
    return mw.ustring.sub( target_str, pos, pos );
end
end


Riga 294: Riga 263:
str_find
str_find


This function duplicates the behavior of {{str_find}}, including all of its quirks.
Questa funzione duplica il comportamento di  {{str_find}}, incluso i suoi comportamenti
This is provided in order to support existing templates, but is NOT RECOMMENDED for
irregolari. Questa funzione è fornita per motivi di compatibilità con i vecchi template,
new code and templates. New code is recommended to use the "find" function instead.
ma SI RACCOMANDA di non utilizzarla in nuovi template. Nello sviluppo di nuovo codice
si raccomanda di usare la funzione "find".


Returns the first index in "source" that is a match to "target".  Indexing is 1-based,
Parametri
and the function returns -1 if the "target" string is not present in "source".
    source: La stringa in cui cercare
    target: la stringa da cercare


Important Note: If the "target" string is empty / missing, this function returns a
Ritorna la posizione nella stringa source del primo carattere in cui c'è è stata
value of "1", which is generally unexpected behavior, and must be accounted for
trovata la stringa target. I caratteri della stringa sono numerati a partire da 1. La funzione
separatetly.
ritorna -1 se la stringa "target" non è contenuta in "source".
 
Nota importante: Per compatibilità con il vecchio template se la stringa "target" è vuota o manca
la funzione ritorna un valore di "1"
]]
]]
function str.str_find( frame )
function str.str_find( frame )
local new_args = str._getParameters( frame.args, {'source', 'target'} )
    local new_args = str._getParameters( frame.args, {'source', 'target'} );
local source_str = new_args['source'] or ''
    local source_str = new_args['source'] or '';
local target_str = new_args['target'] or ''
    local target_str = new_args['target'] or '';


if target_str == '' then
    if target_str == '' then
return 1
        return 1;
end
    end


local start = mw.ustring.find( source_str, target_str, 1, true )
    local start = mw.ustring.find( source_str, target_str, 1, true )
if start == nil then
    if start == nil then
start = -1
        start = -1
end
    end


return start
    return start
end
end


Riga 325: Riga 299:
find
find


This function allows one to search for a target string or pattern within another
Questa funzione permette di cercare una stringa bersaglio o un pattern Lua all'interno di
string.
un'altra stringa.


Usage:
Uso:
{{#invoke:String|find|source_str|target_string|start_index|plain_flag}}
{{#invoke:String|find|stringa_sorgente|stringa_bersaglio|indice_iniziale|plain_flag}}
OR
O
{{#invoke:String|find|source=source_str|target=target_str|start=start_index|plain=plain_flag}}
{{#invoke:String|find|source=stringa_sorgente|target=stringa_bersaglio|start=indice_iniziale|plain=plain_flag}}


Parameters
Parametri
     source: The string to search
     source: La stringa in cui cercare
     target: The string or pattern to find within source
     target: La stringa o pattern Lua da cercare
     start: The index within the source string to start the search, defaults to 1
     start: La posizione da cui iniziare la ricerca, se non specificato è 1
     plain: Boolean flag indicating that target should be understood as plain
     plain: Se è vero indica che la stringa target deve essere considerata come una
        text and not as a Lua style regular expression, defaults to true
          testo normale e non come un pattern Lua, se non specificata è vera


If invoked using named parameters, Mediawiki will automatically remove any leading or
Se richiamata usando parametri nominati Mediawiki rimuoverà automaticamente tutti gli
trailing whitespace from the parameter. In some circumstances this is desirable, in
spazi iniziali e finali. In alcune circostanze questo può essere il comportamento
other cases one may want to preserve the whitespace.
desiderato, in altre si potrebbe volerli conservare.


This function returns the first index >= "start" where "target" can be found
Questa funzione ritorna la prima posizione maggiore o uguale a  "start" a partire dalla quale
within "source".  Indices are 1-based. If "target" is not found, then this
"target" si trova in  "source".  I caratteri della stringa sono numerati a partire da 1.
function returns 0. If either "source" or "target" are missing / empty, this
Se "target" non viene trovato ritorna 0. Se "source" o "target" sono mancanti o vuoti ritorna 0.
function also returns 0.


This function should be safe for UTF-8 strings.
Questa funzione dovrebbe essere sicura per stringhe  UTF-8.
]]
]]
function str.find( frame )
function str.find( frame )
local new_args = str._getParameters( frame.args, {'source', 'target', 'start', 'plain' } )
    local new_args = str._getParameters( frame.args, {'source', 'target', 'start', 'plain' } );
local source_str = new_args['source'] or ''
    local source_str = new_args['source'] or '';
local pattern = new_args['target'] or ''
    local pattern = new_args['target'] or '';
local start_pos = tonumber(new_args['start']) or 1
    local start_pos = tonumber(new_args['start']) or 1;
local plain = new_args['plain'] or true
    local plain = new_args['plain'] or true;


if source_str == '' or pattern == '' then
    if source_str == '' or pattern == '' then
return 0
        return 0;
end
    end


plain = str._getBoolean( plain )
    plain = str._getBoolean( plain );


local start = mw.ustring.find( source_str, pattern, start_pos, plain )
    local start = mw.ustring.find( source_str, pattern, start_pos, plain )
if start == nil then
    if start == nil then
start = 0
        start = 0
end
    end


return start
    return start
end
end


Riga 375: Riga 348:
replace
replace


This function allows one to replace a target string or pattern within another
Questa funzione permette di rimpiazzare una stringa o pattern bersaglio con un'altra
string.
stringa.


Usage:
Uso:
{{#invoke:String|replace|source_str|pattern_string|replace_string|replacement_count|plain_flag}}
{{#invoke:String|replace|stringa_sorgente|stringa_pattern|nuova_stringa|numero_di_sostituzioni|plain_flag}}
OR
O
{{#invoke:String|replace|source=source_string|pattern=pattern_string|replace=replace_string|
{{#invoke:String|replace|source=stringa_sorgente|pattern=stringa_pattern|replace=nuova_stringa|
   count=replacement_count|plain=plain_flag}}
   count=numero_di_sostituzioni|plain=plain_flag}}


Parameters
Parametri:
     source: The string to search
     source: La stringa da cercare
     pattern: The string or pattern to find within source
     pattern: La stringa o pattern Lua da trovare in  source
     replace: The replacement text
     replace: Il testo di sostituzione
     count: The number of occurences to replace, defaults to all.
     count: Il numero di volte in cui rimpiazzare la stringa, se non specificato tutte.
     plain: Boolean flag indicating that pattern should be understood as plain
     plain: Se vero indica che il pattern deve essere considerato come testo normale e non
        text and not as a Lua style regular expression, defaults to true
          come pattern Lua, il valore di default è vero
]]
]]
function str.replace( frame )
function str.replace( frame )
local new_args = str._getParameters( frame.args, {'source', 'pattern', 'replace', 'count', 'plain' } )
    local new_args = str._getParameters( frame.args, {'source', 'pattern', 'replace', 'count', 'plain' } );
local source_str = new_args['source'] or ''
    local source_str = new_args['source'] or '';
local pattern = new_args['pattern'] or ''
    local pattern = new_args['pattern'] or '';
local replace = new_args['replace'] or ''
    local replace = new_args['replace'] or '';
local count = tonumber( new_args['count'] )
    local count = tonumber( new_args['count'] );
local plain = new_args['plain'] or true
    local plain = new_args['plain'] or true;


if source_str == '' or pattern == '' then
    if source_str == '' or pattern == '' then
return source_str
        return source_str;
end
    end
plain = str._getBoolean( plain )
    plain = str._getBoolean( plain );


if plain then
    if plain then
pattern = str._escapePattern( pattern )
        pattern = str._escapePattern( pattern );
replace = mw.ustring.gsub( replace, "%%", "%%%%" ) --Only need to escape replacement sequences.
        replace = mw.ustring.gsub( replace, "%%", "%%%%" ); --Only need to escape replacement sequences.
end
    end


local result
    local result;


if count ~= nil then
    if count ~= nil then
result = mw.ustring.gsub( source_str, pattern, replace, count )
        result = mw.ustring.gsub( source_str, pattern, replace, count );
else
    else
result = mw.ustring.gsub( source_str, pattern, replace )
        result = mw.ustring.gsub( source_str, pattern, replace );
end
    end


return result
    return result;
end
end


--[[
--[[
     simple function to pipe string.rep to templates.
     Funzione per utilizzare string.rep in un template.
]]
]]
function str.rep( frame )
function str.rep( frame )
local repetitions = tonumber( frame.args[2] )
    local repetitions = tonumber( frame.args[2] )
if not repetitions then
    if not repetitions then
return str._error( 'function rep expects a number as second parameter, received "' .. ( frame.args[2] or '' ) .. '"' )
        if frame.args[2] == '' then -- se il secondo parametro è una stringa nulla ritorno una stringa nulla
end
            return ''
return string.rep( frame.args[1] or '', repetitions )
        else
            return str._error( 'la funzione rep si aspetta un secondo parametro con il numero di ripetizioni, ricevuto "' .. ( frame.args[2] or '' ) .. '"' )
        end
    end
    return mw.ustring.rep( frame.args[1] or '', repetitions )
end
end


--[[
--[[
escapePattern
    Funzione per decodificare una stringa codificata percentualmente.
    Richiama la funzione mw.uri.decode di scribunto, vedi
    https://www.mediawiki.org/wiki/Extension:Scribunto/Lua_reference_manual#mw.uri.decode
]]


This function escapes special characters from a Lua string pattern. See [1]
function str.decode( frame )
for details on how patterns work.
    local valid_enctype = { QUERY = true, WIKI = true, PATH = true}


[1] https://www.mediawiki.org/wiki/Extension:Scribunto/Lua_reference_manual#Patterns
    local new_args = str._getParameters(frame.args, {'source', 'enctype'})
    local source = new_args['source'] or ''
    local enc_type = new_args['enctype'] or 'QUERY'
    if not valid_enctype[enc_type] then
        enc_type = 'QUERY'
    end
    return mw.uri.decode(source, enc_type)
end


Usage:
--[[
{{#invoke:String|escapePattern|pattern_string}}
    Funzione per semplificare stringhe con diacritici
]]


Parameters
function str.collate( frame )
     pattern_string: The pattern string to escape.
 
]]
     local collation = {
function str.escapePattern( frame )
        { '[áàăắằẵẳâấầẫẩǎåǻäǟãȧǡąāảȁȃạặậḁⱥᶏᴂɐᶐɒ]' , 'a'},
local pattern_str = frame.args[1]
        {'[ÁÀĂẮẰẴẲÂẤẦẪẨǍÅÅǺÄǞÃȦǠĄĀẢȀȂẠẶẬḀȺᴁ]', 'A'},
if not pattern_str then
        {'[ḃḅḇbƀɓ]', 'b'},
return str._error( 'No pattern string specified' )
        {'[ḂḄḆɃ]', 'B'},
end
        {'[ćĉčċçḉȼƈ]', 'c'},
local result = str._escapePattern( pattern_str )
        {'[ĆĈČĊÇḈȻƇ]', 'C'},
return result
        {'[đḍḓḏðď]', 'd'},
        {'[ĐḌḒḎÐĎ]', 'D'},
        {'[éèèêếềễểěëẽėȩḝęēḗḕẻȅȇẹệḙḛǝ]', 'e'},
        {'[ÉÈÈÊẾỀỄỂĚËẼĖȨḜĘĒḖḔẺȄȆẸỆḘḚƎ]', 'E'},
        {'[ḟⅎ]', 'f'},
        {'[ḞℲ]', 'F'},
        {'[ǵğĝǧġģḡᵹɠ]', 'g'},
        {'[ǴĞĜǦĠĢḠƓ]', 'G'},
        {'[ĥȟḧḣḩħḥḫẖ]', 'h'},
        {'[ĤȞḦḢḨĦḤḪ]', 'H'},
        {'[íìĭîǐïḯĩįīỉȉȋịḭı]', 'i'},
        {'[ÍÌĬÎǏÏḮĨĮĪỈȈȊỊḬİ]', 'I'},
        {'[ĵǰ]', 'j'},
        {'[Ĵ]', 'J'},
        {'[ḱǩķ]', 'k'},
        {'[ḰǨĶ]', 'K'},
        {'[ĺľļłḷḹḽḻl·l·ŀƚⱡ]', 'l'},
        {'[ĹĽĻŁḶḸḼḺL·L·ĿȽⱠ]', 'L'},
        {'[ḿṁṃ]', 'm'},
        {'[ḾṀṂ]', 'M'},
        {'[ńǹňñṅņṇṋṉ]', 'n'},
        {'[ŃǸŇÑṄŅṆṊṈ]', 'N'},
        {'[óòŏôốồỗổǒöȫőõṍṏȭȯȱøǿǫǭōṓṑỏȍȏơớờỡởợọộ]', 'o'},
        {'[ÓÒŎÔỐỒỖỔǑÖȪŐÕṌṎȬȮȰØǾǪǬŌṒṐỎȌȎƠỚỜỠỞỢỌỘ]', 'O'},
        {'[ṕṗ]', 'p'},
        {'[ṔṖ]', 'P'},
        {'[ŕřṙŗȑȓṛṝṟ]', 'r'},
        {'[ŔŘṘŖȐȒṚṜṞ]', 'R'},
        {'[śṥŝšṧṡşṣṩș]', 's'},
        {'[ŚṤŜŠṦṠŞṢṨȘ]', 'S'},
        {'[ťṫẗţṭțṱṯ]', 't'},
        {'[ŤṪŢṬȚṰṮ]', 'T'},
        {'[úùŭûǔůüǘǜǚǖűũṹųūṻủȕȗưứừữửựụṳṷṵʉ]', 'u'},
        {'[ÚÙŬÛǓŮÜǗǛǙǕŰŨṸŲŪṺỦȔȖƯỨỪỮỬỰỤṲṶṴɄ]', 'U'},
        {'[ṽṿʋ]', 'v'},
        {'[ṼṾƲ]', 'V'},
        {'[ẃẁŵẘẅẇẉⱳ]', 'w'},
        {'[ẂẀŴ̊ẄẆẈⱲ]', 'W'},
        {'[ýỳŷẙÿỹẏȳỷỵɏƴ]', 'y'},
        {'[ÝỲŶ̊ŸỸẎȲỶỴɎƳ]', 'Y'},
        {'[źẑžżẓẕƶȥʐⱬ]', 'z'},
        {'[ŹẐŽŻẒẔƵȤʐⱫ]', 'Z'},
    }
 
    local new_args = str._getParameters(frame.args, {'source'})
    local source = new_args['source'] or ''
    --local source = mw.ustring.toNFC(source)
 
    for _, el in ipairs(collation) do
        source = mw.ustring.gsub( source, el[1], el[2])
    end
    return source
end
end


--[[
--[[
count
    Funzione per estrarre da un titolo la stringa adatta all'ordinamento alfabetico.  
This function counts the number of occurrences of one string in another.
]]
]]
function str.count(frame)
 
local args = str._getParameters(frame.args, {'source', 'pattern', 'plain'})
function str.titolo_alfa(frame)
local source = args.source or ''
    -- Evito "I", "A", "Die"... che darebbero molte false corrispondenze in lingue diverse
local pattern = args.pattern or ''
    local articoli = {"Il ", "Lo ", "La ", "L'", "Gli ", "Le ", "Un ", "Uno ", "Una ", "Un'", "The ", "An ", "Les ", "El ", "Los ", "Las ", "Der ", "Das "}
local plain = str._getBoolean(args.plain or true)
 
if plain then
    local source = frame.args[1]
pattern = str._escapePattern(pattern)
    if not source or source == '' then
end
        source = mw.title.getCurrentTitle().text
local _, count = mw.ustring.gsub(source, pattern, '')
    end
return count
    if not source or source == '' then
        return ''
    end
    source = mw.ustring.gsub(source, ' %(.*%)$', '')
    source = str.collate( { args = { source } } )
    source = mw.ustring.gsub(source, "^['%(%.¡¿ ]*", '')
    for _,article in ipairs(articoli) do
        source = mw.ustring.gsub(source, "^(" .. article .. ")(.*)$", "%2, %1")
    end
    source = mw.ustring.gsub(source, '^%l', mw.ustring.upper)
    source = mw.text.trim(source)
    return source
end
 
 
-- =================================================================
-- Classe per gestire i parametri
-- =================================================================
local Param = {}
Param.__index = Param
 
function Param.new(par_name, alt_name)
    if  par_name ~= "$index" and not mw.ustring.find(par_name, '#') then par_name = par_name .. '#' end;
    return setmetatable({
        name = par_name,
        base_name = mw.ustring.gsub(par_name, ' ?#', '', 1),
        alt = alt_name or ''
    }, Param)
end
 
function Param:get_other_value(args, index)
    if self.name == '$index' then
        return tostring(index), true
    else
        return args[mw.ustring.gsub(self.name, '#', tostring(index), 1)] or '', false
    end
end
 
function Param:get_first_value(args, index, base_index)
    function value_or_nil (s)
        if s and s~= '' then return s end
        return nil
    end
 
    if self.name == '$index' then
        return tostring(index), true
    end
    if index == base_index then
        return value_or_nil(args[mw.ustring.gsub(self.name, '#', tostring(index), 1)]) or
              value_or_nil(args[self.base_name]) or value_or_nil(args[self.alt]) or '', false
    else
        return value_or_nil(args[mw.ustring.gsub(self.name, '#', tostring(index), 1)]) or  
              value_or_nil(args[self.alt]) or '', false
    end
end
 
 
setmetatable(Param, { __call = function(_, ...) return Param.new(...) end })
-- =================================================================
-- fine dichiarazione classe per parametro
-- =================================================================
 
-- =================================================================
-- Classe per gestire il messaggio
    -- =================================================================
local Message = {}
Message.__index = Message
 
function Message.new(msg)
    -- converto parentesi graffe che sono state precedute da "\"
    msg = mw.ustring.gsub(msg, '\\{', '{')
    msg = mw.ustring.gsub(msg, '\\}', '}')
    local frame = mw.getCurrentFrame():getParent() or mw.getCurrentFrame()
 
    return setmetatable({
        msg =  msg,
        values = {},
        frame = frame,
    }, Message)
end
 
function Message:reset_values()
    self.values = {}
end
 
function Message:add_value(value)
    self.values[#self.values+1] = value
end
end
function Message:text()
    return self.frame:preprocess(mw.message.newRawMessage(self.msg, self.values):plain())
end
setmetatable(Message, { __call = function(_, ...) return Message.new(...) end })
-- =================================================================
-- fine dichiarazione classe per messaggio
-- =================================================================


--[[
--[[
endswith
    Funzione per unire una o più liste di valori in una stringa.
This function determines whether a string ends with another string.
 
Uso:
{{#invoke:String|arraytostring|par1=xxx|par2=xxx....|parn=xxxx|msg=msg|separator=|congiunzione=|pre=|post=|lista=}}
 
Parametri:
    par1...parn: i nomi base dei parametri da inserire nel messsaggio, devono contenere il carattere '#' che precisa la
            posizione in cui inserire l'indice. Se viene valorizzato a '$index' avrà automaticamente il valore del
            contatore.
    msg: il messaggio (cioè la riga unitaria) in cui eventuali caratteri '{', '}' dovranno essere
        preceduti da '\', mentre una "|" dovrà essere inserita con il template {{!}}.
        I valori da sostituire sono da inserire come $n ($1 sarà sostituito dal
        valore di par1, $2 dal valore di par2, ecc...)
    separatore: La stringa da inserire tra ogni valore
    congiunzione: La stringa da inserire invece di separatore tra l'ultimo e il penultimo valore. Se
                  non precisato viene usato il valore di separatore
    pre: eventuale stringa che precede l'unione delle stringhe
    post: eventuale stringa che segue l'unione delle stringhe
    indentazione: una stringa da ripetere cumulativamente per ogni messaggio (tipicamente '&nbsp')
    lista: se valorizzata a:
                'puntata' imposta i parametri per una lista puntata
                'ordinata' imposta i parametri per una lista ordinata
                'infobox' imposta l'unione come una lista, eccetto che nel caso ci sia
                          solo un elemento
                Se lista è valorizzata  separatore/congiunzione/pre/post sono ignorati, salvo il caso di 'infobox' e la
                lista contenga solo un elemento.
    nmin = indice iniziale da cui partire a scandire i parametri (di default pari a 1)
    nmax = indice massimo a cui arrivare con i parametri (se non precisato illimitato)
    nobbligatori = l'indice minimo che deve essere valutato anche in presenza di buchi nella sequenza (comunque l'indice massimo
                  che viene valutato è nmax)
    baseIndex = valore dell'indice che può essere sostituito da stringa nulla  (default = 1)
 
Esempi di chiamata:
    {{#invoke:string:arraytostring|par1=var#|separatore=,|congiunzione=#32;e#32;}}
    {{#invoke:string:arraytostring|par1=disegnatore #|par2=disegnatore # nota|msg = $1 <small>$2</small>|lista=infobox }}
    {{#invoke:string:arraytostring|par1=editore #|par2=etichetta #|par3=editore # nota| msg=$1 \{\{#if:$2{{!}}$2 <small>$3</small>\}\}|lista=infobox }}
 
]]
]]
function str.endswith(frame)
function str.arraytostring(frame)
local args = str._getParameters(frame.args, {'source', 'pattern'})
 
local source = args.source or ''
    local base_args = frame.args
local pattern = args.pattern or ''
    local params = {}
if pattern == '' then
    if not base_args then return str._error('Lista parametri vuota') end
-- All strings end with the empty string.
    -- carico la lista dei parametri
return "yes"
    local index = 1
end
    while true do
if mw.ustring.sub(source, -mw.ustring.len(pattern), -1) == pattern then
        local par_name = base_args['par' .. index] or (index == 1 and base_args['par']) or ''
return "yes"
        if par_name == '' then break end;
else
        --carico eventuale nome alternativo per il primo parametro
return ""
        local alt_name = base_args['altpar' .. index] or (index == 1 and base_args['altpar']) or ''
end
        params[index] = Param(par_name, alt_name)
        index = index + 1
    end
    --carico il messaggio
    local msg = base_args.msg or '$1'
    --if msg == '' then return str._error('Manca il messaggio da riprodurre.') end
    local message = Message(msg)
    elements = {}
    -- carico gli altri parametri di formattazione
    local Nmax = tonumber(base_args.Nmax) or tonumber(base_args.nmax) or 0
    local base_index = tonumber(base_args.baseindex) or tonumber(base_args.baseIndex) or 1
    local index = tonumber(base_args.Nmin) or tonumber(base_args.nmin) or base_index
    local Nobbligatori = tonumber(base_args.Nobbligatori) or tonumber(base_args.nobbligatori) or base_index-1
    local indentazione = base_args.indentazione or nil
    local args = frame:getParent().args
    -- estraggo il primo valore
    local found = false
 
    for i, param in ipairs(params) do
        local v, is_index = param:get_first_value(args, index, base_index)
        if (not(is_index) or base_index<=Nobbligatori) and v ~= '' then found = true end
        message:add_value(mw.text.trim(v))
    end
    if found then
        elements[#elements+1] = message:text()
        index = index + 1
    end
    -- elaboro i valori successivi
    while true do
        if Nmax > 0 and index > Nmax then break end
        message:reset_values()
        found = false
        for i, param in ipairs(params) do
            local v, is_index = param:get_other_value(args, index)
            if (not(is_index) or index<=Nobbligatori) and v ~= '' then found = true end
            message:add_value(mw.text.trim(v))
        end
        if found then
            elements[#elements+1] = message:text()
        elseif index >= Nobbligatori then
            break
        end
        index = index + 1
    end
    if #elements == 0 then return '' end
    -- carico separatori, congiunzione, pre e postazione
    local pre, post, separatore, congiunzione, indent = '', '', '', '', ''
    local lista = base_args.lista or ''
    if lista == 'puntata' or (lista =='infobox' and #elements >1) then
        pre = '<UL><LI>'
        post = '</LI>\n</UL>'
        separatore = '</LI>\n<LI>'
        congiunzione = separatore
    elseif lista == 'ordinata' then
        pre = '<OL><LI>'
        post = '</LI>\n</OL>'
        separatore = '</LI>\n<LI>'
        congiunzione = separatore
    else
        pre = base_args.pre or ''
        post = base_args.post or ''
        separatore = base_args.separatore or ''
        congiunzione = base_args.congiunzione or separatore
    end
    if indentazione then
        local current_indentazione = indentazione
        for i, msg in ipairs(elements) do
            elements[i] = current_indentazione .. elements[i]
            current_indentazione = current_indentazione .. indentazione
        end
    end
    return pre .. mw.text.listToText(elements, separatore, congiunzione) .. post
end
end


--[[
--[[
join
    Funzione per unire una lista di valori in una stringa.
 
Uso:
{{#invoke:String|listtostring|par_number=xxx|msg=msg|separator=|congiunzione=|pre=|post=|lista=}}
 
Parametri:
    par_number: il numero di parametri che compongono il messaggio
    msg: il messaggio (cioè la riga unitaria) in cui eventuali caratteri '{', '}' dovranno essere
        preceduti da '\', mentre una "|" dovrà essere inserita con il template {{!}}.
        I valori da sostituire sono da inserire come $n (nel primo messaggio $1 sarà sostituito dal parametro posizionale di
        posizione Nmin, $2 da Nmin+2, ecc...., nel secondo messaggio $1 sarà sostituito dal parametro posizionale Nmin+par_number,
        $2 da Nmin+par_number+2, ec....)
        valore di par1, $2 dal valore di par2, ecc...)
    separatore: La stringa da inserire tra ogni valore
    congiunzione: La stringa da inserire invece di separatore tra l'ultimo e il penultimo valore. Se
                  non precisato viene usato il valore di separatore
    pre: eventuale stringa che precede l'unione delle stringhe
    post: eventuale stringa che segue l'unione delle stringhe
    lista: se valorizzata a:
                'puntata' imposta i parametri per una lista puntata
                'ordinata' imposta i aprametri per una lista ordinata
                'infobox' imposta l'unione come una lista, eccetto che nel caso ci sia
                          solo un elemento
                Se lista è valorizzata  separatore/congiunzione/pre/post sono ignorati, salvo il caso di 'infobox' e la
                lista contenga solo un elemento.
    nmax = indice massimo a cui arrivare con i parametri (se non precisato illimitato)
    nobbligatori = l'indice minimo che deve essere valutato anche in presenza di buchi nella sequenza (comunque l'indice massimo
                  che viene valutato è nmax)
    baseIndex = valore del primo parametro posizionale da cui cominciare a leggere (default = 1)


Join all non empty arguments together; the first argument is the separator.
Usage:
{{#invoke:String|join|sep|one|two|three}}
]]
]]
function str.join(frame)
 
local args = {}
 
local sep
function str.listtostring(frame)
for _, v in ipairs( frame.args ) do
 
if sep then
    local base_args = frame.args
if v ~= '' then
    local params = {}
table.insert(args, v)
    if not base_args then return str._error('Lista parametri vuota') end
end
    -- carico la lista dei parametri
else
    local base_index = tonumber(base_args.base_index) or 1
sep = v
    local par_number = tonumber(base_args.par_number) or 1
end
    local Nmax = tonumber(base_args.nmax) or 0
end
    local Nobbligatori = tonumber(base_args.nobbligatori) or base_index-1
return table.concat( args, sep or '' )
    --carico il messaggio
    local message = Message(base_args.msg or '$1')
    elements = {}
    -- carico gli altri parametri di formattazione
    local index = base_index
    local args = frame:getParent().args
      -- elaboro i valori successivi
    local found = true
    while true do
        if Nmax > 0 and index > Nmax then break end
        message:reset_values()
        found = false
        for i = index, index+par_number-1 do
            message:add_value(args[i] or '')
            if args[i] then
                found = true
            end
        end
        if found then
            elements[#elements+1] = message:text()
        elseif index > Nobbligatori then
            break
        end
        index = index + par_number
    end
    if #elements == 0 then return '' end
    -- carico separatori, congiunzione, pre e postazione
    local pre, post, separatore, congiunzione = '', '', '', ''
    local lista = base_args.lista or ''
    if lista == 'puntata' or (lista =='infobox' and #elements >1) then
        pre = '<UL><LI>'
        post = '</LI>\n</UL>'
        separatore = '</LI>\n<LI>'
        congiunzione = separatore
    elseif lista == 'ordinata' then
        pre = '<OL><LI>'
        post = '</LI>\n</OL>'
        separatore = '</LI>\n<LI>'
        congiunzione = separatore
    else
        pre = base_args.pre or ''
        post = base_args.post or ''
        separatore = base_args.separatore or ''
        congiunzione = base_args.congiunzione or separatore
    end
    return pre .. mw.text.listToText(elements, separatore, congiunzione) .. post
end
end


--[[
--[[
Helper function that populates the argument list given that user may need to use a mix of
Funzione di aiuto che popola la lista di argomenti, dato che l'utente può voler utilizzare sia
named and unnamed parameters. This is relevant because named parameters are not
parametri nominati che non nominati. Questo è rilevante perchè gli spazi iniziali iniziali
identical to unnamed parameters due to string trimming, and when dealing with strings
e finali dei parametri nominati sono eliminati, mentre quelli dei parametri non nominati
we sometimes want to either preserve or remove that whitespace depending on the application.
non lo sono. Secondo l'applicazione  si potrebbe a volte conservare o rimuovere gli spazi.
]]
]]
function str._getParameters( frame_args, arg_list )
function str._getParameters( frame_args, arg_list )
local new_args = {}
    local new_args = {};
local index = 1
    local index = 1;
local value
    local value;


for _, arg in ipairs( arg_list ) do
    for i,arg in ipairs( arg_list ) do
value = frame_args[arg]
        value = frame_args[arg]
if value == nil then
        if value == nil then
value = frame_args[index]
            value = frame_args[index];
index = index + 1
            index = index + 1;
end
        end
new_args[arg] = value
        new_args[arg] = value;
end
    end


return new_args
    return new_args;
end
end


--[[
--[[
Helper function to handle error messages.
Funzione di appoggio per gestire i messaggi di errore.
]]
]]
function str._error( error_str )
function str._error( error_str )
local frame = mw.getCurrentFrame()
    local frame = mw.getCurrentFrame();
local error_category = frame.args.error_category or 'Errors reported by Module String'
    local error_category = frame.args.error_category or 'Errori riportati dal modulo String';
local ignore_errors = frame.args.ignore_errors or false
    local ignore_errors = frame.args.ignore_errors or false;
local no_category = frame.args.no_category or false
    local no_category = frame.args.no_category or false;


if str._getBoolean(ignore_errors) then
    if str._getBoolean(ignore_errors) then
return ''
        return '';
end
    end


local error_str = '<strong class="error">String Module Error: ' .. error_str .. '</strong>'
    local error_str = '<strong class="error">Errore nel modulo String: ' .. error_str .. '</strong>';
if error_category ~= '' and not str._getBoolean( no_category ) then
    if error_category ~= '' and not str._getBoolean( no_category ) then
error_str = '[[Category:' .. error_category .. ']]' .. error_str
        error_str = '[[Categoria:' .. error_category .. ']]' .. error_str;
end
    end


return error_str
    return error_str;
end
end


--[[
--[[
Helper Function to interpret boolean strings
Funzione di appoggio per interpretare le stringhe come valori booleane
]]
]]
function str._getBoolean( boolean_str )
function str._getBoolean( boolean_str )
local boolean_value
    local boolean_value;


if type( boolean_str ) == 'string' then
    if type( boolean_str ) == 'string' then
boolean_str = boolean_str:lower()
        boolean_str = boolean_str:lower();
if boolean_str == 'false' or boolean_str == 'no' or boolean_str == '0'
        if boolean_str == 'false' or boolean_str == 'no' or boolean_str == '0'
or boolean_str == '' then
                or booleean_str == 'falso' or boolean_str == '' then
boolean_value = false
            boolean_value = false;
else
        else
boolean_value = true
            boolean_value = true;
end
        end
elseif type( boolean_str ) == 'boolean' then
    elseif type( boolean_str ) == 'boolean' then
boolean_value = boolean_str
        boolean_value = boolean_str;
else
    else
error( 'No boolean value found' )
        error('Nessun valore booleano trovato' );
end
    end
return boolean_value
    return boolean_value
end
end


--[[
--[[
Helper function that escapes all pattern characters so that they will be treated
Funzione di appoggio per aggiungere un carattere di escape a tutti i caratteri speciali,
as plain text.
così da trattare una stringa come testo normale e non come pattern di Lua.
]]
]]
function str._escapePattern( pattern_str )
function str._escapePattern( pattern_str )
return mw.ustring.gsub( pattern_str, "([%(%)%.%%%+%-%*%?%[%^%$%]])", "%%%1" )
    return mw.ustring.gsub( pattern_str, "([%(%)%.%%%+%-%*%?%[%^%$%]])", "%%%1" );
end
end


return str
return str
-- Version history:
-- 29/3/2013 traduzione iniziale da en:module:String versione 540627185 del 26 febbraio 2013
-- 07/05/2013 aggiunta funzione rep da en:module:String versione 552254999 del 26 aprile 2013
-- 19/08/2013 aggiunta funzione arraytostring

Versione delle 11:50, 31 ago 2020

Modulo Lua per la manipolazione di stringhe.

La maggior parte delle funzioni di questo modulo possono essere invocate con parametri con nome, senza nome o con un misto di entrambi. Il software di MediaWiki, quando vengono usati parametri con nome, rimuoverà ogni spazio iniziale o finale dal parametro. A seconda dell'uso che si vuole fare della funzione può essere vantaggioso conservare oppure rimuovere questi spazi.

Chiamata delle funzioni

Questo modulo è pensato per essere richiamato da template, non direttamente da una voce. Il modulo è richiamabile anche da un altro modulo Lua, ma in questo caso è meglio usare direttamente le funzioni Lua di manipolazione delle stringhe:

Per richiamare il modulo da un template usare la sintassi: {{{{{|safesubst:}}}#invoke:String|nome della funzione|parametro 1|parametro 2|...|parametro n|}}. Per esempio d'uso vedi il template {{Str len}}

Opzioni globali

Alcune funzioni possono dare un messaggio di errore o impostare una categoria di errori, la generazione di questo messaggio e/o la creazione di questa categoria possono essere controllate dalle seguenti opzioni.

ignore_errors: se impostato a 1 o "true" ogni condizione di errore darà una stringa vuota piuttosto che un messaggio di errore.
error_category: nel caso si verifichi un errore è il nome di una categoria da includere insieme al messaggio di errore. La categoria di default è Categoria:Errori riportati dal modulo String.
no_category: Se settato a 1 o "true", non verranno aggiunte categorie in caso di errore.

Funzioni

len

Questa funzione restituisce la lunghezza di una stringa.

Uso
  • {{#invoke:String|len|stringa}}

O

  • {{#invoke:String|len|s= stringa }}
Parametri
  • s: La stringa di cui restituire la lunghezza

Se invocata usando parametri nominati, Mediawiki rimuoverà automaticamente ogni spazio iniziale o finale dalla stringa.

sub

Questa funzione restituisce la sottostringa di una stringa bersaglio, come indicato dagli indici

Uso
  • {{#invoke:String|sub|stringa_bersaglio|indice_iniziale|indice_finale}}

O

  • {{#invoke:String|sub|s= stringa_bersaglio |i= indice_iniziale |j= indice_finale }}
Parametri
  • s: La stringa da cui estrarre una sottostringa
  • i: La posizione iniziale del primo carattere della sottostringa da restituire, se non specificato è 1.
  • j: La posizione finale dell'ultimo carattere della sottostringa da restituire, se non specificato corrisponde alla lunghezza della stringa_bersaglio (l'ultimo carattere).

I caratteri della stringa sono numerati a partire da 1. Se i o j hanno un valore negativo allora contano la posizione contando dalla fine della stringa, -1 è l'ultimo carattere della stringa, -2 il penultimo, ecc...

Se le posizioni sono al di fuori degli estremi della stringa viene restituito un messaggio di errore.

match

Questa funzione restituisce una sottostringa della stringa bersaglio corrispondente a un pattern specificato.

Uso
  • {{#invoke:String|match|source_string|pattern_string|start_index|match_number|plain_flag|nomatch_output}}

O

  • {{#invoke:String|match|s= source_string |pattern= pattern_string |start= start_index |match= match_number |plain= plain_flag |nomatch= nomatch_output }}
Parametri
  • s: la stringa da cercare
  • pattern: il pattern da cercare nella stringa s
  • start: la posizione iniziale da cui iniziare la ricerca, se non specificato è 1.
  • match: se ci sono corrispondenze multiple, quale restituire: 1 per la prima corrispondenza, 2 per la seconda, ecc... Un valore negativo indica di contare all'indietro a partire dall'ultima corrispondenza, quindi match = -1 significa chiedere l'ultima corrispondenza. Se non specificato è 1
  • plain: se vero specifica che il pattern deve essere considerato come una stringa normale, piuttosto che un pattern Lua. Se non specificata è falso.
  • nomatch: il valore da restituire se non ci sono corrispondenze, invece di un errore.

Se richiamata usando parametri nominati Mediawiki rimuoverà automaticamente tutti gli spazi iniziali e finali. In alcune circostanze questo può essere il comportamento desiderato, in altre si potrebbe volerli conservare.

Se match o start sono al di fuori degli estremi della stringa s, allora la funzione restituisce un errore. Viene generato un errore anche se il non vengono trovate corrispondenze. Per sopprimere gli errori si può aggiungere il parametro ignore_errors=true, in questo caso in caso di errore verrà restituita una stringa vuota.

pos

Questa funzione restituisce il carattere della stringa in posizione pos.

Uso
  • {{#invoke:String|pos|stringa_bersaglio|indice}}

O

  • {{#invoke:String|pos|target= stringa_bersaglio |pos= indice }}
Parametri
  • target: la stringa in cui cercare
  • pos: la posizione del carattere da restituire

Se richiamata usando parametri nominati Mediawiki rimuoverà automaticamente tutti gli spazi iniziali e finali. In alcune circostanze questo può essere il comportamento desiderato, in altre si potrebbe volerli conservare.

I caratteri della stringa sono numerati a partire da 1. Se pos è un valore negativo allora conta la posizione partendo dalla fine della stringa, -1 è l'ultimo carattere della stringa, -2 il penultimo, ecc...

Se la posizione richiesta è 0 o al di fuori degli estremi della stringa viene restituito un errore.

str_find

Questa funzione duplica il comportamento di {{str_find}}, inclusi i casi particolari. Questa funzione è fornita per motivi di compatibilità con i vecchi template, ma SI RACCOMANDA di non utilizzarla in nuovi template. Nello sviluppo di nuovo codice si raccomanda di usare la funzione find.

Parametri
  • source: la stringa in cui cercare
  • target: la stringa da cercare

Restituisce la posizione nella stringa source del primo carattere in cui è stata trovata la stringa target. I caratteri della stringa sono numerati a partire da 1. La funzione restituisce -1 se la stringa target non è contenuta in source.

Nota importante: Per compatibilità con il vecchio template, se la stringa target è vuota o manca, la funzione restituisce il valore "1"

find

Questa funzione permette di cercare una stringa bersaglio o un pattern Lua all'interno di un'altra stringa.

Uso
  • {{#invoke:String|find|stringa_sorgente|stringa_bersaglio|indice_iniziale|plain_flag}}

O

  • {{#invoke:String|find|source= stringa_sorgente |target= stringa_bersaglio |start= indice_iniziale |plain= plain_flag }}
Parametri
  • source: la stringa in cui cercare
  • target: la stringa o pattern Lua da cercare
  • start: la posizione da cui iniziare la ricerca, se non specificato è 1
  • plain: Se è vero indica che la stringa target deve essere considerata come un testo normale e non come un pattern Lua, se non specificata è vera

Se richiamata usando parametri nominati Mediawiki rimuoverà automaticamente tutti gli spazi iniziali e finali. In alcune circostanze questo può essere il comportamento desiderato, in altre si potrebbe volerli conservare.

Questa funzione restituisce la prima posizione maggiore o uguale a start a partire dalla quale target si trova in source. I caratteri della stringa sono numerati a partire da 1. Se target non viene trovato dà 0. Se source o target sono mancanti o vuoti dà 0.

Questa funzione dovrebbe essere sicura per stringhe UTF-8.

replace

Questa funzione permette di rimpiazzare una stringa o pattern bersaglio con un'altra stringa.

Uso
  • {{#invoke:String|replace|stringa_sorgente|stringa_pattern|nuova_stringa|numero_di_sostituzioni|plain_flag}}

O

  • {{#invoke:String|replace|source= stringa_sorgente |pattern= stringa_pattern |replace= nuova_stringa | count= numero_di_sostituzioni |plain= plain_flag }}
Parametri
  • source: la stringa in cui cercare
  • pattern: la stringa o pattern Lua da trovare in source
  • replace: il testo di sostituzione
  • count: il numero di volte in cui rimpiazzare la stringa, se non specificato tutte.
  • plain: se vero indica che il pattern deve essere considerato come testo normale e non come pattern Lua, il valore di default è vero

arraytostring

Formatta una o più liste di valori in una singola stringa

Uso
  • {{#invoke:String|arraytostring|par1|formato|separatore|congiunzione}}
Parametri
  • par1 ... parn: il nome base delle variabili da unire, deve contenere il carattere "#" che precisa la posizione in cui inserire l'indice. Ad esempio se par1 è "Param#", la funzione unirà i valori della lista di parametri Param1, Param2, Param3, ecc...
    Il parametro "Param" (senza numero) sarà considerato equivalente a "Param1" (questo comportamento può essere modificato con il parametro "baseIndex")
  • msg: formattazione da applicare alla compilazione dei parametri. Il simbolo $n fa da segnaposto per il parametro "parn". È possibile inserire codice mediawiki, ma eventuali caratteri "{" e "}" dovranno essere preceduti da un "\", mentre il carattere "|" dovrà essere inserito con la costante {{!}}. Un eventuale "\}" finale deve sempre essere staccato, con spazio o altro, dal "}}" di fine comando.
  • separatore: una stringa (opzionale) da inserire tra ogni valore
  • congiunzione: una stringa (opzionale) da inserire al posto del separatore tra l'ultimo e il penultimo valore. Se non dichiarata viene usato il valore di "separatore"
  • nmin: indice iniziale da cui partire a scandire i parametri (di default pari a 1)
  • nmax: indice massimo a cui è possibile arrivare con i parametri (se non precisato è illimitato)
  • nobbligatori = l'indice minimo che deve essere valutato anche in presenza di buchi nella sequenza (come indice massimo sarà comunque valutato "nmax")
  • baseIndex: valore dell'indice parametrico che coincide con il parametro senza indice (normalmente è 1, quindi i parametri "par1" e "par" sono equivalenti; se per esempio viene impostato a 0 allora è "par0" che sarà equivalente a "par")
  • lista: parametro a cui è possibile assegnare uno tra i seguenti valori.
    puntata - formatta l'elenco di valori come una lista puntata (i valori di "separatore" e "congiunzione" sono ignorati)
    ordinata - formatta l'elenco di valori come una lista numerata (i valori di "separatore" e "congiunzione" sono ignorati)
    infobox - formatta l'elenco di valori come una lista puntata (i valori di "separatore" e "congiunzione" sono ignorati), eccetto che nel caso in cui ci sia un solo elemento
Esempi di chiamata
{{#invoke:string|arraytostring|par1=var#|separatore=&#32;|congiunzione=&#32;e&#32;}}
Formatta una lista di parametri "var1", "var2" ... "varn" separandoli con una virgola, tranne per gli ultimi due uniti dalla congiunzione " e "
{{#invoke:string|arraytostring|par1=disegnatore #|par2=disegnatore # nota|msg = $1 <small>$2</small>|lista=infobox}}
Formatta coppie di parametri "disegnatore 1", "disegnatore 2" ... "disegnatore n" e "disegnatore 1 nota", "disegnatore 2 nota" ... "disegnatore n nota". Ogni coppia sarà formattata come "Disegnatore disegnatore nota" e queste saranno unite in una lista puntata. Usata in {{Personaggio}} per formattare le liste di disegnatori/autori/editori, ecc...
{{#invoke:String|arraytostring|par1=#|msg=''$1''|separatore=<nowiki>|</nowiki>|Nmin=2}}
Unisce i parametri ordinali "2", "3" ... "n" in una lista separate da "|". Ogni valore viene reso in corsivo. Usata in {{tl}} per formattare la lista opzionale di parametri.

collate

Questa funzione restituisce la stringa privata degli eventuali segni diacritici sulle lettere dell'alfabeto latino. Trasforma ad esempio "Çịàö" in "Ciao", preferibile ad esempio per gli ordinamenti alfabetici.

Uso
  • {{#invoke:String|collate|stringa}}
Parametri
  • stringa: La stringa da cui togliere i segni

decode

Questa funzione accetta una stringa codificata con il sistema a percentuali usato negli URL e restituisce la stringa decodificata. Fa quindi l'opposto della funzione di sistema urlencode. Trasforma ad esempio "Come%20va%3F" in "Come va?".

Uso
  • {{#invoke:String|decode|stringa}}
Parametri
  • stringa: La stringa da decodificare

titolo_alfa

Questa funzione accetta una stringa che corrisponde a un titolo di opera e restituisce la stringa adattata all'ordinamento alfabetico. Trasforma ad esempio "La pietà" in "Pieta, La". Non funziona sempre, non potendo capire il significato delle parole, ma risolve automaticamente la maggior parte dei casi.

Uso
  • {{#invoke:String|titolo_alfa|titolo}}
Parametri
  • titolo: Il titolo di opera. Di default viene preso il titolo della pagina in cui ci si trova.

Unit test

Unit test per questo modulo sono disponibili a Modulo:String/test, per la loro esecuzione visitare Discussioni_modulo:String/test.

Documentazione sui pattern Lua

Diverse funzioni fanno uso di pattern Lua, questi sono una forma di espressione regolare, per maggiori informazioni sulla loro sintassi vedi:


--[[

Questo modulo serve a fornire l'accesso alle funzioni stringa base.

La maggior parte delle funzioni di questo modulo possono essere invocate con
parametri con nome, senza nome o con un misto di entrambi. Quando vengono usati
parametri con nome il software di Mediawiki rimuoverà ogni spazio iniziale o finale
dal parametro. A seconda dell'uso che si vuole fare della funzione può essere
vantaggioso conservare oppure rimuovere questi spazi.

Opzioni globali
    ignore_errors: se settato a 'true' o 1, ogni condizione di errore ritornerà una stringa vuota
                   piuttosto che un messaggio di errore.

    error_category: nel caso si verifichi un errore è il nome di una categoria da includere
                    insieme al messaggio di errore. La categoria di default
                    [Categoria:Errori del Module String]. (TODO:verificare)

    no_category: Se settato a 'true' o 1, non verranno aggiunte categorie in caso di errore.

Unit tests per questo modulo sono disponibili a Module:String/test.

Diverse funzioni fanno uso di pattern Lua, questi sono una forma di espressione regolare, per
maggiori informazioni vedi:
* http://www.lua.org/manual/5.1/manual.html#5.4.1
* http://www.mediawiki.org/wiki/Extension:Scribunto/Lua_reference_manual#Patterns
* http://www.mediawiki.org/wiki/Extension:Scribunto/Lua_reference_manual#Ustring_patterns

]]

local str = {}

--[[
len

Questa funzione ritorna la lunghezza di una stringa.

Uso:
{{#invoke:String|len|stringa|}}
O
{{#invoke:String|len|s=stringa}}

Parametri
    s: La stringa di cui ritornare la lunghezza

Se invocata usando parametri nominati, Mediawiki rimuoverà automaticamente ogni spazio iniziale
o finale dalla stringa.
]]
function str.len( frame )
    local new_args = str._getParameters( frame.args, {'s'} );
    local s = new_args['s'] or '';
    return mw.ustring.len( s )
end

--[[
sub

Questa funzione ritorna la sottostringa di una stringa bersaglio, come indicato dagli indici

Uso:
{{#invoke:String|sub|stringa_bersaglio|indice_iniziale|indice_finale}}
O
{{#invoke:String|sub|s=stringa_bersaglio|i=indice_iniziale|j=indice_finale}}

Parameters
    s: La stringa da cui estrarre una sottostringa
    i: La posizione iniziale del primo carattere della sottostringa da ritornare, se non
       specificato è 1.
    j: La posizione finale dell'ultimo carattere della sottostringa da ritornare, se non
       specificato corrisponde alla lunghezza della stringa_bersaglio (l'ultimo carattere).

I caratteri della stringa sono numerati a partire da 1. Se i o j hanno un valore negativo allora
contano la posizione contando dalla fine della stringa, -1 è l'ultimo carattere della stringa,
-2 il penultimo, ecc...

Se le posizioni sono al di fuori degli estremi della stringa viene ritornato un messaggio di
errore.
]]
function str.sub( frame )
    local new_args = str._getParameters( frame.args, { 's', 'i', 'j' } );
    local s = new_args['s'] or '';
    local i = tonumber( new_args['i'] ) or 1;
    local j = tonumber( new_args['j'] ) or -1;

    local len = mw.ustring.len( s );

    -- Convert negatives for range checking
    if i < 0 then
        i = len + i + 1;
    end
    if j < 0 then
        j = len + j + 1;
    end

    if i > len or j > len or i < 1 or j < 1 then
        return str._error( 'Indici fuori dagli estremi della stringa' );
    end
    if j < i then
        return str._error( 'Indici in ordine sbagliato' );
    end

    return mw.ustring.sub( s, i, j )
end

--[[
Questa funzione implementa tutte le caratteristiche di  {{str sub}} e viene mantenuta per motivi
di compatibilità con template più vecchi.
]]
function str.sublength( frame )
    local i = tonumber( frame.args.i ) or 0
    local len = tonumber( frame.args.len )
    return mw.ustring.sub( frame.args.s, i + 1, len and ( i + len ) )
end

--[[
match

Questa funzione ritorna dalla stringa bersaglio una sottostringa corrispondente a un pattern
specificato.

Uso:
{{#invoke:String|match|source_string|pattern_string|start_index|match_number|plain_flag|nomatch_output}}
O
{{#invoke:String|match|s=source_string|pattern=pattern_string|start=start_index
    |match=match_number|plain=plain_flag|nomatch=nomatch_output}}

Parametri
    s: La stringa da cercare
    pattern: Il pattern da cercare nella stringa
    start: La posizione iniziale da cui iniziare la ricerca, se non specificato è 1.
    match: Se c'è ci sono corrispondenze multiple quale ritornare, 1 per la prima
    corrispondenza, 2 per la seconda ecc.. Un valore negativo indica di contare
    all'indietro a partire dall'ultima corrispondenza, quindi match = -1 significa
    chiedere l'ultima corrispondenza. Se non specificato è 1
    plain: Se vero specifica che il pattern deve essere considerato come una
           stringa normale, piuttosto che un pattern Lua. Se non specificata è falsa.
    nomatch: Il valore da ritornare se non ci sono corrispondenze, invece di ritornare
             un errore.

Se richiamata usando parametri nominati Mediawiki rimuoverà automaticamente tutti gli
spazi iniziali e finali. In alcune circostanze questo può essere il comportamento
desiderato, in altre si potrebbe volerli conservare.

Se match_number o start_index sono al di fuori degli estremi della stringa s, allora
la funzione ritorna un errore. Viene generato un errore anche se il non vengono trovate
corrispondenze. Per sopprimere gli errori si può aggiungere il parametro ignore_errors=true,
in questo caso in caso di errore verrò ritornata una stringa vuota.

]]
function str.match(frame)
    return str._match(frame.args)
end

--[[
Entry point per chiamata diretta da un modulo
]]
function str._match( args )
    local new_args = str._getParameters( args, {'s', 'pattern', 'start', 'match', 'plain', 'nomatch'} );
    local s = new_args['s'] or '';
    local start = tonumber( new_args['start'] ) or 1;
    local plain_flag = str._getBoolean( new_args['plain'] or false );
    local pattern = new_args['pattern'] or '';
    local match_index = math.floor( tonumber(new_args['match']) or 1 );
    local nomatch = new_args['nomatch'];

    if s == '' then
        return nomatch or str._error( 'La stringa in cui cercare è vuota' );
    end
    if pattern == '' then
        return nomatch or str._error( 'La stringa o pattern da cercare è vuota' );
    end
    if math.abs(start) < 1 or math.abs(start) > mw.ustring.len( s ) then
        return nomatch or str._error( 'La posizione iniziale richiesta è fuori dagli estremi della stringa' );
    end
    if match_index == 0 then
        return nomatch or str._error( 'Match index è nullo' );
    end
    if plain_flag then
        pattern = str._escapePattern( pattern );
    end

    local result
    if match_index == 1 then
        -- Il caso più semplice, trova la prima corrispondenza
        result = mw.ustring.match( s, pattern, start )
    else
        if start > 1 then
            s = mw.ustring.sub( s, start );
        end

        local iterator = mw.ustring.gmatch(s, pattern);
        if match_index > 0 then
            -- Ricerca in avanti
            for w in iterator do
                match_index = match_index - 1;
                if match_index == 0 then
                    result = w;
                    break;
                end
            end
        else
            -- Ricerca all'indietro deve estrarre tutte le corrispondenze
            local result_table = {};
            local count = 1;
            for w in iterator do
                result_table[count] = w;
                count = count + 1;
            end

            result = result_table[ count + match_index ];
        end
    end

    if result == nil then
        if nomatch == nil then
            return str._error( 'Corrispondenza non trovata' );
        else
            return nomatch;
        end
    else
        return result;
    end
end

--[[
pos

Questa funzione ritorna il carattere della stringa in posizione pos.

Uso:
{{#invoke:String|pos|stringa_bersaglio|indice}}
O
{{#invoke:String|pos|target=stringa_bersaglio|pos=indice}}

Parametri
    target: La stringa in cui cercare
    pos: La posizione del carattere da ritornare

Se richiamata usando parametri nominati Mediawiki rimuoverà automaticamente tutti gli
spazi iniziali e finali. In alcune circostanze questo può essere il comportamento
desiderato, in altre si potrebbe volerli conservare.

I caratteri della stringa sono numerati a partire da 1. Se pos è un valore negativo allora
conta la posizione partendo dalla fine della stringa, -1 è l'ultimo carattere della stringa,
-2 il penultimo, ecc...

Se la posizione richiesta è 0 o al di fuori degli estremi della stringa viene ritornato
un errore.
]]
function str.pos( frame )
    local new_args = str._getParameters( frame.args, {'target', 'pos'} );
    local target_str = new_args['target'] or '';
    local pos = tonumber( new_args['pos'] ) or 0;

    if pos == 0 or math.abs(pos) > mw.ustring.len( target_str ) then
        return str._error( 'Indice della stringa fuori dagli estremi' );
    end

    return mw.ustring.sub( target_str, pos, pos );
end

--[[
str_find

Questa funzione duplica il comportamento di  {{str_find}}, incluso i suoi comportamenti
irregolari. Questa funzione è fornita per motivi di compatibilità con i vecchi template,
ma SI RACCOMANDA di non utilizzarla in nuovi template. Nello sviluppo di nuovo codice
si raccomanda di usare la funzione  "find".

Parametri
    source: La stringa in cui cercare
    target: la stringa da cercare

Ritorna la posizione nella stringa source del primo carattere in cui c'è è stata
trovata la stringa target. I caratteri della stringa sono numerati a partire da 1. La funzione
ritorna -1 se la stringa "target" non è contenuta in "source".

Nota importante: Per compatibilità con il vecchio template se la stringa "target" è vuota o manca
la funzione ritorna un valore di "1"
]]
function str.str_find( frame )
    local new_args = str._getParameters( frame.args, {'source', 'target'} );
    local source_str = new_args['source'] or '';
    local target_str = new_args['target'] or '';

    if target_str == '' then
        return 1;
    end

    local start = mw.ustring.find( source_str, target_str, 1, true )
    if start == nil then
        start = -1
    end

    return start
end

--[[
find

Questa funzione permette di cercare una stringa bersaglio o un pattern Lua all'interno di
un'altra stringa.

Uso:
{{#invoke:String|find|stringa_sorgente|stringa_bersaglio|indice_iniziale|plain_flag}}
O
{{#invoke:String|find|source=stringa_sorgente|target=stringa_bersaglio|start=indice_iniziale|plain=plain_flag}}

Parametri
    source: La stringa in cui cercare
    target: La stringa o pattern Lua da cercare
    start: La posizione da cui iniziare la ricerca, se non specificato è 1
    plain: Se è vero indica che la stringa target deve essere considerata come una
           testo normale e non come un pattern Lua, se non specificata è vera

Se richiamata usando parametri nominati Mediawiki rimuoverà automaticamente tutti gli
spazi iniziali e finali. In alcune circostanze questo può essere il comportamento
desiderato, in altre si potrebbe volerli conservare.

Questa funzione ritorna la prima posizione maggiore o uguale a  "start" a partire dalla quale
"target" si trova in  "source".  I caratteri della stringa sono numerati a partire da 1.
Se "target" non viene trovato ritorna 0. Se "source" o "target" sono mancanti o vuoti ritorna 0.

Questa funzione dovrebbe essere sicura per stringhe  UTF-8.
]]
function str.find( frame )
    local new_args = str._getParameters( frame.args, {'source', 'target', 'start', 'plain' } );
    local source_str = new_args['source'] or '';
    local pattern = new_args['target'] or '';
    local start_pos = tonumber(new_args['start']) or 1;
    local plain = new_args['plain'] or true;

    if source_str == '' or pattern == '' then
        return 0;
    end

    plain = str._getBoolean( plain );

    local start = mw.ustring.find( source_str, pattern, start_pos, plain )
    if start == nil then
        start = 0
    end

    return start
end

--[[
replace

Questa funzione permette di rimpiazzare una stringa o pattern bersaglio con un'altra
stringa.

Uso:
{{#invoke:String|replace|stringa_sorgente|stringa_pattern|nuova_stringa|numero_di_sostituzioni|plain_flag}}
O
{{#invoke:String|replace|source=stringa_sorgente|pattern=stringa_pattern|replace=nuova_stringa|
   count=numero_di_sostituzioni|plain=plain_flag}}

Parametri:
    source: La stringa da cercare
    pattern: La stringa o pattern Lua da trovare in  source
    replace: Il testo di sostituzione
    count: Il numero di volte in cui rimpiazzare la stringa, se non specificato tutte.
    plain: Se vero indica che il pattern deve essere considerato come testo normale e non
           come pattern Lua, il valore di default è vero
]]
function str.replace( frame )
    local new_args = str._getParameters( frame.args, {'source', 'pattern', 'replace', 'count', 'plain' } );
    local source_str = new_args['source'] or '';
    local pattern = new_args['pattern'] or '';
    local replace = new_args['replace'] or '';
    local count = tonumber( new_args['count'] );
    local plain = new_args['plain'] or true;

    if source_str == '' or pattern == '' then
        return source_str;
    end
    plain = str._getBoolean( plain );

    if plain then
        pattern = str._escapePattern( pattern );
        replace = mw.ustring.gsub( replace, "%%", "%%%%" ); --Only need to escape replacement sequences.
    end

    local result;

    if count ~= nil then
        result = mw.ustring.gsub( source_str, pattern, replace, count );
    else
        result = mw.ustring.gsub( source_str, pattern, replace );
    end

    return result;
end

--[[
    Funzione per utilizzare string.rep in un template.
]]

function str.rep( frame )
    local repetitions = tonumber( frame.args[2] )
    if not repetitions then
        if frame.args[2] == '' then -- se il secondo parametro è una stringa nulla ritorno una stringa nulla
            return ''
        else
            return str._error( 'la funzione rep si aspetta un secondo parametro con il numero di ripetizioni, ricevuto "' .. ( frame.args[2] or '' ) .. '"' )
        end
    end
    return mw.ustring.rep( frame.args[1] or '', repetitions )
end

--[[
    Funzione per decodificare una stringa codificata percentualmente.
    Richiama la funzione mw.uri.decode di scribunto, vedi
    https://www.mediawiki.org/wiki/Extension:Scribunto/Lua_reference_manual#mw.uri.decode
]]

function str.decode( frame )
    local valid_enctype = { QUERY = true, WIKI = true, PATH = true}

    local new_args = str._getParameters(frame.args, {'source', 'enctype'})
    local source = new_args['source'] or ''
    local enc_type = new_args['enctype'] or 'QUERY'
    if not valid_enctype[enc_type] then
        enc_type = 'QUERY'
    end
    return mw.uri.decode(source, enc_type)
end

--[[
    Funzione per semplificare stringhe con diacritici
]]

function str.collate( frame )

    local collation = {
        { '[áàăắằẵẳâấầẫẩǎåǻäǟãȧǡąāảȁȃạặậḁⱥᶏᴂɐᶐɒ]' , 'a'},
        {'[ÁÀĂẮẰẴẲÂẤẦẪẨǍÅÅǺÄǞÃȦǠĄĀẢȀȂẠẶẬḀȺᴁ]', 'A'},
        {'[ḃḅḇbƀɓ]', 'b'},
        {'[ḂḄḆɃ]', 'B'},
        {'[ćĉčċçḉȼƈ]', 'c'},
        {'[ĆĈČĊÇḈȻƇ]', 'C'},
        {'[đḍḓḏðď]', 'd'},
        {'[ĐḌḒḎÐĎ]', 'D'},
        {'[éèèêếềễểěëẽėȩḝęēḗḕẻȅȇẹệḙḛǝ]', 'e'},
        {'[ÉÈÈÊẾỀỄỂĚËẼĖȨḜĘĒḖḔẺȄȆẸỆḘḚƎ]', 'E'},
        {'[ḟⅎ]', 'f'},
        {'[ḞℲ]', 'F'},
        {'[ǵğĝǧġģḡᵹɠ]', 'g'},
        {'[ǴĞĜǦĠĢḠƓ]', 'G'},
        {'[ĥȟḧḣḩħḥḫẖ]', 'h'},
        {'[ĤȞḦḢḨĦḤḪ]', 'H'},
        {'[íìĭîǐïḯĩįīỉȉȋịḭı]', 'i'},
        {'[ÍÌĬÎǏÏḮĨĮĪỈȈȊỊḬİ]', 'I'},
        {'[ĵǰ]', 'j'},
        {'[Ĵ]', 'J'},
        {'[ḱǩķ]', 'k'},
        {'[ḰǨĶ]', 'K'},
        {'[ĺľļłḷḹḽḻl·l·ŀƚⱡ]', 'l'},
        {'[ĹĽĻŁḶḸḼḺL·L·ĿȽⱠ]', 'L'},
        {'[ḿṁṃ]', 'm'},
        {'[ḾṀṂ]', 'M'},
        {'[ńǹňñṅņṇṋṉ]', 'n'},
        {'[ŃǸŇÑṄŅṆṊṈ]', 'N'},
        {'[óòŏôốồỗổǒöȫőõṍṏȭȯȱøǿǫǭōṓṑỏȍȏơớờỡởợọộ]', 'o'},
        {'[ÓÒŎÔỐỒỖỔǑÖȪŐÕṌṎȬȮȰØǾǪǬŌṒṐỎȌȎƠỚỜỠỞỢỌỘ]', 'O'},
        {'[ṕṗ]', 'p'},
        {'[ṔṖ]', 'P'},
        {'[ŕřṙŗȑȓṛṝṟ]', 'r'},
        {'[ŔŘṘŖȐȒṚṜṞ]', 'R'},
        {'[śṥŝšṧṡşṣṩș]', 's'},
        {'[ŚṤŜŠṦṠŞṢṨȘ]', 'S'},
        {'[ťṫẗţṭțṱṯ]', 't'},
        {'[ŤṪŢṬȚṰṮ]', 'T'},
        {'[úùŭûǔůüǘǜǚǖűũṹųūṻủȕȗưứừữửựụṳṷṵʉ]', 'u'},
        {'[ÚÙŬÛǓŮÜǗǛǙǕŰŨṸŲŪṺỦȔȖƯỨỪỮỬỰỤṲṶṴɄ]', 'U'},
        {'[ṽṿʋ]', 'v'},
        {'[ṼṾƲ]', 'V'},
        {'[ẃẁŵẘẅẇẉⱳ]', 'w'},
        {'[ẂẀŴ̊ẄẆẈⱲ]', 'W'},
        {'[ýỳŷẙÿỹẏȳỷỵɏƴ]', 'y'},
        {'[ÝỲŶ̊ŸỸẎȲỶỴɎƳ]', 'Y'},
        {'[źẑžżẓẕƶȥʐⱬ]', 'z'},
        {'[ŹẐŽŻẒẔƵȤʐⱫ]', 'Z'},
    }

    local new_args = str._getParameters(frame.args, {'source'})
    local source = new_args['source'] or ''
    --local source = mw.ustring.toNFC(source)

    for _, el in ipairs(collation) do
        source = mw.ustring.gsub( source, el[1], el[2])
    end
    return source
end

--[[
    Funzione per estrarre da un titolo la stringa adatta all'ordinamento alfabetico. 
]]

function str.titolo_alfa(frame)
    -- Evito "I", "A", "Die"... che darebbero molte false corrispondenze in lingue diverse
    local articoli = {"Il ", "Lo ", "La ", "L'", "Gli ", "Le ", "Un ", "Uno ", "Una ", "Un'", "The ", "An ", "Les ", "El ", "Los ", "Las ", "Der ", "Das "}

    local source = frame.args[1]
    if not source or source == '' then
        source = mw.title.getCurrentTitle().text 
    end
    if not source or source == '' then
        return ''
    end
    source = mw.ustring.gsub(source, ' %(.*%)$', '')
    source = str.collate( { args = { source } } )
    source = mw.ustring.gsub(source, "^['%(%.¡¿ ]*", '')
    for _,article in ipairs(articoli) do
        source = mw.ustring.gsub(source, "^(" .. article .. ")(.*)$", "%2, %1")
    end
    source = mw.ustring.gsub(source, '^%l', mw.ustring.upper)
    source = mw.text.trim(source)
    return source
end


-- =================================================================
-- Classe per gestire i parametri
-- =================================================================
local Param = {}
Param.__index = Param

function Param.new(par_name, alt_name)
    if  par_name ~= "$index" and not mw.ustring.find(par_name, '#') then par_name = par_name .. '#' end;
    return setmetatable({
        name = par_name,
        base_name = mw.ustring.gsub(par_name, ' ?#', '', 1),
        alt = alt_name or ''
     }, Param)
end

function Param:get_other_value(args, index)
    if self.name == '$index' then
        return tostring(index), true
    else
        return args[mw.ustring.gsub(self.name, '#', tostring(index), 1)] or '', false
    end
end

function Param:get_first_value(args, index, base_index)
    function value_or_nil (s)
        if s and s~= '' then return s end
        return nil
    end

    if self.name == '$index' then
        return tostring(index), true
    end
    if index == base_index then
        return value_or_nil(args[mw.ustring.gsub(self.name, '#', tostring(index), 1)]) or 
               value_or_nil(args[self.base_name]) or value_or_nil(args[self.alt]) or '', false
    else
        return value_or_nil(args[mw.ustring.gsub(self.name, '#', tostring(index), 1)]) or 
               value_or_nil(args[self.alt]) or '', false
    end
end


setmetatable(Param, { __call = function(_, ...) return Param.new(...) end })
-- =================================================================
-- fine dichiarazione classe per parametro
-- =================================================================

-- =================================================================
-- Classe per gestire il messaggio
    -- =================================================================
local Message = {}
Message.__index = Message

function Message.new(msg)
    -- converto parentesi graffe che sono state precedute da "\"
    msg = mw.ustring.gsub(msg, '\\{', '{')
    msg = mw.ustring.gsub(msg, '\\}', '}')
    local frame = mw.getCurrentFrame():getParent() or mw.getCurrentFrame()

    return setmetatable({
        msg =  msg,
        values = {},
        frame = frame,
     }, Message)
end

function Message:reset_values()
    self.values = {}
end

function Message:add_value(value)
    self.values[#self.values+1] = value
end

function Message:text()
    return self.frame:preprocess(mw.message.newRawMessage(self.msg, self.values):plain())
end

setmetatable(Message, { __call = function(_, ...) return Message.new(...) end })
-- =================================================================
-- fine dichiarazione classe per messaggio
-- =================================================================



--[[
    Funzione per unire una o più liste di valori in una stringa.

Uso:
{{#invoke:String|arraytostring|par1=xxx|par2=xxx....|parn=xxxx|msg=msg|separator=|congiunzione=|pre=|post=|lista=}}

Parametri:
    par1...parn: i nomi base dei parametri da inserire nel messsaggio, devono contenere il carattere '#' che precisa la
             posizione in cui inserire l'indice. Se viene valorizzato a '$index' avrà automaticamente il valore del
             contatore.
    msg: il messaggio (cioè la riga unitaria) in cui eventuali caratteri '{', '}' dovranno essere
         preceduti da '\', mentre una "|" dovrà essere inserita con il template {{!}}.
         I valori da sostituire sono da inserire come $n ($1 sarà sostituito dal
         valore di par1, $2 dal valore di par2, ecc...)
    separatore: La stringa da inserire tra ogni valore
    congiunzione: La stringa da inserire invece di separatore tra l'ultimo e il penultimo valore. Se
                  non precisato viene usato il valore di separatore
    pre: eventuale stringa che precede l'unione delle stringhe
    post: eventuale stringa che segue l'unione delle stringhe
    indentazione: una stringa da ripetere cumulativamente per ogni messaggio (tipicamente '&nbsp')
    lista: se valorizzata a:
                'puntata' imposta i parametri per una lista puntata
                'ordinata' imposta i parametri per una lista ordinata
                'infobox' imposta l'unione come una lista, eccetto che nel caso ci sia
                          solo un elemento
                Se lista è valorizzata  separatore/congiunzione/pre/post sono ignorati, salvo il caso di 'infobox' e la
                lista contenga solo un elemento.
    nmin = indice iniziale da cui partire a scandire i parametri (di default pari a 1)
    nmax = indice massimo a cui arrivare con i parametri (se non precisato illimitato)
    nobbligatori = l'indice minimo che deve essere valutato anche in presenza di buchi nella sequenza (comunque l'indice massimo
                   che viene valutato è nmax)
    baseIndex = valore dell'indice che può essere sostituito da stringa nulla  (default = 1)

Esempi di chiamata:
     {{#invoke:string:arraytostring|par1=var#|separatore=,|congiunzione=#32;e#32;}}
     {{#invoke:string:arraytostring|par1=disegnatore #|par2=disegnatore # nota|msg = $1 <small>$2</small>|lista=infobox }}
     {{#invoke:string:arraytostring|par1=editore #|par2=etichetta #|par3=editore # nota| msg=$1 \{\{#if:$2{{!}}$2 <small>$3</small>\}\}|lista=infobox }}

]]
function str.arraytostring(frame)

    local base_args = frame.args
    local params = {}
    if not base_args then return str._error('Lista parametri vuota') end
    -- carico la lista dei parametri
    local index = 1
    while true do
        local par_name = base_args['par' .. index] or (index == 1 and base_args['par']) or ''
        if par_name == '' then break end;
        --carico eventuale nome alternativo per il primo parametro
        local alt_name = base_args['altpar' .. index] or (index == 1 and base_args['altpar']) or ''
        params[index] = Param(par_name, alt_name)
        index = index + 1
    end
    --carico il messaggio
    local msg = base_args.msg or '$1'
    --if msg == '' then return str._error('Manca il messaggio da riprodurre.') end
    local message = Message(msg)
    elements = {}
    -- carico gli altri parametri di formattazione
    local Nmax = tonumber(base_args.Nmax) or tonumber(base_args.nmax) or 0
    local base_index = tonumber(base_args.baseindex) or tonumber(base_args.baseIndex) or 1
    local index = tonumber(base_args.Nmin) or tonumber(base_args.nmin) or base_index
    local Nobbligatori = tonumber(base_args.Nobbligatori) or tonumber(base_args.nobbligatori) or base_index-1
    local indentazione = base_args.indentazione or nil
    local args = frame:getParent().args
    -- estraggo il primo valore
    local found = false

    for i, param in ipairs(params) do
        local v, is_index = param:get_first_value(args, index, base_index)
        if (not(is_index) or base_index<=Nobbligatori) and v ~= '' then found = true end
        message:add_value(mw.text.trim(v))
    end
    if found then
        elements[#elements+1] = message:text()
        index = index + 1
    end
    -- elaboro i valori successivi
    while true do
        if Nmax > 0 and index > Nmax then break end
        message:reset_values()
        found = false
        for i, param in ipairs(params) do
            local v, is_index = param:get_other_value(args, index)
            if (not(is_index) or index<=Nobbligatori) and v ~= '' then found = true end
            message:add_value(mw.text.trim(v))
        end
        if found then
            elements[#elements+1] = message:text()
        elseif index >= Nobbligatori then
            break
        end
        index = index + 1
    end
    if #elements == 0 then return '' end
    -- carico separatori, congiunzione, pre e postazione
    local pre, post, separatore, congiunzione, indent = '', '', '', '', ''
    local lista = base_args.lista or ''
    if lista == 'puntata' or (lista =='infobox' and #elements >1) then
        pre = '<UL><LI>'
        post = '</LI>\n</UL>'
        separatore = '</LI>\n<LI>'
        congiunzione = separatore
    elseif lista == 'ordinata' then
        pre = '<OL><LI>'
        post = '</LI>\n</OL>'
        separatore = '</LI>\n<LI>'
        congiunzione = separatore
    else
        pre = base_args.pre or ''
        post = base_args.post or ''
        separatore = base_args.separatore or ''
        congiunzione = base_args.congiunzione or separatore
    end
    if indentazione then
        local current_indentazione = indentazione
        for i, msg in ipairs(elements) do
            elements[i] = current_indentazione .. elements[i]
            current_indentazione = current_indentazione .. indentazione 
        end
    end
    return pre .. mw.text.listToText(elements, separatore, congiunzione) .. post
end

--[[
    Funzione per unire una lista di valori in una stringa.

Uso:
{{#invoke:String|listtostring|par_number=xxx|msg=msg|separator=|congiunzione=|pre=|post=|lista=}}

Parametri:
    par_number: il numero di parametri che compongono il messaggio
    msg: il messaggio (cioè la riga unitaria) in cui eventuali caratteri '{', '}' dovranno essere
         preceduti da '\', mentre una "|" dovrà essere inserita con il template {{!}}.
         I valori da sostituire sono da inserire come $n (nel primo messaggio $1 sarà sostituito dal parametro posizionale di
         posizione Nmin, $2 da Nmin+2, ecc...., nel secondo messaggio $1 sarà sostituito dal parametro posizionale Nmin+par_number,
         $2 da Nmin+par_number+2, ec....)
         valore di par1, $2 dal valore di par2, ecc...)
    separatore: La stringa da inserire tra ogni valore
    congiunzione: La stringa da inserire invece di separatore tra l'ultimo e il penultimo valore. Se
                  non precisato viene usato il valore di separatore
    pre: eventuale stringa che precede l'unione delle stringhe
    post: eventuale stringa che segue l'unione delle stringhe
    lista: se valorizzata a:
                'puntata' imposta i parametri per una lista puntata
                'ordinata' imposta i aprametri per una lista ordinata
                'infobox' imposta l'unione come una lista, eccetto che nel caso ci sia
                          solo un elemento
                Se lista è valorizzata  separatore/congiunzione/pre/post sono ignorati, salvo il caso di 'infobox' e la
                lista contenga solo un elemento.
    nmax = indice massimo a cui arrivare con i parametri (se non precisato illimitato)
    nobbligatori = l'indice minimo che deve essere valutato anche in presenza di buchi nella sequenza (comunque l'indice massimo
                   che viene valutato è nmax)
    baseIndex = valore del primo parametro posizionale da cui cominciare a leggere (default = 1)

]]


function str.listtostring(frame)

    local base_args = frame.args
    local params = {}
    if not base_args then return str._error('Lista parametri vuota') end
    -- carico la lista dei parametri
    local base_index = tonumber(base_args.base_index) or 1
    local par_number = tonumber(base_args.par_number) or 1
    local Nmax = tonumber(base_args.nmax) or 0
    local Nobbligatori = tonumber(base_args.nobbligatori) or base_index-1
    --carico il messaggio
    local message = Message(base_args.msg or '$1')
    elements = {}
    -- carico gli altri parametri di formattazione
    local index = base_index
    local args = frame:getParent().args
      -- elaboro i valori successivi
    local found = true
    while true do
        if Nmax > 0 and index > Nmax then break end
        message:reset_values()
        found = false
        for i = index, index+par_number-1 do
            message:add_value(args[i] or '')
            if args[i] then
                found = true
            end
        end
        if found then 
            elements[#elements+1] = message:text()
        elseif index > Nobbligatori then
            break
        end
        index = index + par_number
    end
    if #elements == 0 then return '' end
    -- carico separatori, congiunzione, pre e postazione
    local pre, post, separatore, congiunzione = '', '', '', ''
    local lista = base_args.lista or ''
    if lista == 'puntata' or (lista =='infobox' and #elements >1) then
        pre = '<UL><LI>'
        post = '</LI>\n</UL>'
        separatore = '</LI>\n<LI>'
        congiunzione = separatore
    elseif lista == 'ordinata' then
        pre = '<OL><LI>'
        post = '</LI>\n</OL>'
        separatore = '</LI>\n<LI>'
        congiunzione = separatore
    else
        pre = base_args.pre or ''
        post = base_args.post or ''
        separatore = base_args.separatore or ''
        congiunzione = base_args.congiunzione or separatore
    end
    return pre .. mw.text.listToText(elements, separatore, congiunzione) .. post
end

--[[
Funzione di aiuto che popola la lista di argomenti, dato che l'utente può voler utilizzare sia
parametri nominati che non nominati. Questo è rilevante perchè gli spazi iniziali iniziali
e finali dei parametri nominati sono eliminati, mentre quelli dei parametri non nominati
non lo sono. Secondo l'applicazione  si potrebbe a volte conservare o rimuovere gli spazi.
]]
function str._getParameters( frame_args, arg_list )
    local new_args = {};
    local index = 1;
    local value;

    for i,arg in ipairs( arg_list ) do
        value = frame_args[arg]
        if value == nil then
            value = frame_args[index];
            index = index + 1;
        end
        new_args[arg] = value;
    end

    return new_args;
end

--[[
Funzione di appoggio per gestire i messaggi di errore.
]]
function str._error( error_str )
    local frame = mw.getCurrentFrame();
    local error_category = frame.args.error_category or 'Errori riportati dal modulo String';
    local ignore_errors = frame.args.ignore_errors or false;
    local no_category = frame.args.no_category or false;

    if str._getBoolean(ignore_errors) then
        return '';
    end

    local error_str = '<strong class="error">Errore nel modulo String: ' .. error_str .. '</strong>';
    if error_category ~= '' and not str._getBoolean( no_category ) then
        error_str = '[[Categoria:' .. error_category .. ']]' .. error_str;
    end

    return error_str;
end

--[[
Funzione di appoggio per interpretare le stringhe come valori booleane
]]
function str._getBoolean( boolean_str )
    local boolean_value;

    if type( boolean_str ) == 'string' then
        boolean_str = boolean_str:lower();
        if boolean_str == 'false' or boolean_str == 'no' or boolean_str == '0'
                or booleean_str == 'falso' or boolean_str == '' then
            boolean_value = false;
        else
            boolean_value = true;
        end
    elseif type( boolean_str ) == 'boolean' then
        boolean_value = boolean_str;
    else
        error('Nessun valore booleano trovato' );
    end
    return boolean_value
end

--[[
Funzione di appoggio per aggiungere un carattere di escape a tutti i caratteri speciali,
così da trattare una stringa come testo normale e non come pattern di Lua.
]]
function str._escapePattern( pattern_str )
    return mw.ustring.gsub( pattern_str, "([%(%)%.%%%+%-%*%?%[%^%$%]])", "%%%1" );
end

return str

-- Version history:
-- 29/3/2013 traduzione iniziale da en:module:String versione 540627185 del 26 febbraio 2013
-- 07/05/2013 aggiunta funzione rep da en:module:String versione 552254999 del 26 aprile 2013
-- 19/08/2013 aggiunta funzione arraytostring